Where did you try to buy tires??
My new Hatch!!! Tons of pics
- Thread starter mylovehx
- Start date
Online tires I think. I'm glad i reused my 205's, I was a little unsure about the 195's.
I did swap out my wheels yesterday. The Works are off for the winter.
Here's a picture of the current state of the coupe
Short stems installed
Right after the last wheel was put on
They are a less tighter fit than the Works. I was thinking about getting some spacers to fill up the gap.
I did swap out my wheels yesterday. The Works are off for the winter.
Here's a picture of the current state of the coupe
Short stems installed
Right after the last wheel was put on
They are a less tighter fit than the Works. I was thinking about getting some spacers to fill up the gap.
Looks pretty good. Do you plan on painting the black accents red anytime?
Next summer I am painting the handles and mirrors
The profile of the tire could have told you that. You have a shorter sidewall and increased camber due to the stretch. Instead of spacers, you should correct camber to fill up the space.
True, true. Ill do the washer trick like a boss. What's the plans for your hatch now??
No way. New wheels are boss!
Thanks guys!
My exhaust is getting installed on Thursday and my catch can finally showed up! (pics up tomorrow) So I will take my old VC to get the fittings welded and then its turbo install city after that
So I installed the new retrofitted projectors. I have gotten the city lights or auto adjusts wired in yet. Got the old out to pay a friend for the turbo install. And on the turbo note I installed the FMIC and I hope I will get more done. I'll post up pics in a little bit!
As promised some pictures!
I started to take pictures of the process of retrofitting but like usual I got too into the work lol
First: I AM SORRY CHILD
Split the lens from the case
Where the auto unit connects for anyone who was curious
Take the bulb holder then remove retaining clip and glare shield and reinstall
And then by magic it puts its self back together with the new projector! lol
Here they are installed along with the FMIC
And where I am going to drill the hole for the piping
Here's the catch can setup
I started to take pictures of the process of retrofitting but like usual I got too into the work lol
First: I AM SORRY CHILD
Split the lens from the case
Where the auto unit connects for anyone who was curious
Take the bulb holder then remove retaining clip and glare shield and reinstall
And then by magic it puts its self back together with the new projector! lol
Here they are installed along with the FMIC
And where I am going to drill the hole for the piping
Here's the catch can setup
Pics of the cutoff? Quick question. You wouldn't know if Honda sells the plastic adjuster tabs? Mine are so worn I can't adjust my cutoff.
trying to hold back lol.
Thanks fellas!
Not yet. I had other things come up after the install. When I get it back from the exhaust place I may try to adjust everything and take the pics then. I don't think they do but don't quote me on it!
Also I dropped off the old VC to get the fittings welded on.