Bad clutch or something else?

[EG2 LX]

the clutch doesnt really slip, but the pressure in my clutch pedal is very low, and i sometimes lose pressure in it completely and i have to pick it back up off the floor and it gains a little bit of pressure again. its still driveable but it is sometimes hard to get into gear. its not the clutch master or slave cyliner, replaced both of them already to see if that was the problem, still same problem. possibly a bad pressure plate? also when starting out in first gear the pedal seems to vibrate a little bit. just need your guys input i dont wanna goo ahead and order a clutch kit if i dont have too...thanks for your replies in advance!

 

[CodeName_EJ6]

Check to see if fuild leaks between master clutch and slave. It could also me the fuild if you using that cheap s**t

 

[BioHazard the Reaper]

how does a hydraulic clutch pedal vibrate.

 

[UMADBRO?]

Could be a bad slave.

 

[davis_1996ekhb]

i have the same issue n my d16z6
master and slave cyl have been replaced
clutch was new win installed idk what my issue would be either :-/

 

[JohnS.]

i have the same issue n my d16z6
master and slave cyl have been replaced
clutch was new win installed idk what my issue would be either :-/

Thank you for taking the time to search and at least you bumped a thread that's relevant to your issue.

You're not losing any fluid? Where did you get your MC and slave? Are they cheap "generic" ones?