new clutch 5 months and slips

[d16y8skunk2]

ok guys need help i replaced my clutch about 5 to 6 months ago couse it was slipping realy bad and had no power. i replaced clutch pressure plate throw out barring waited 500 miles for breakin in and a couple days ago i was on the high was on 4rth gear steped steped on the gas and all of a sudden it started slipping at 70 miles since then it slips on all gear its a stage 3 xtd clutch kit. im thinking it could it be flywheel it was sanded down and hit with a power metal cookie and if it is the flywheel is it best to just redo the whole thing all over?

 

[d16y8skunk2]

sorry thats high way at 70 miles

 

[203CT]

could be oil getting in the trans case. or flywheel

 

[d16y8skunk2]

could be oil getting in the trans case. or flywheel

would that make my clutch pedel come out by just a tap? and the shifter goes in by bearly taping the clutch

 

[d16y8skunk2]

so i replaced my master cylinder which was leaking and the slave cylinder did the bleeding and still no power when i put it in gear and press the gas. i can put it in first let go the clutch and the car will not move or shut off. im at a lost new clutch, p plate, throw out,cylinders both, and still man im so fustrated

 

[b16lewis]

The reason your car was so easy to pull out of gear was because of the pedal adjustment, but with that being said sounds like there is something missing here. If you can put into gear let off the clutch and the car does not move you my friend have fried that clutch. Also if for some reason you ordered the wrong clutch the splines on the clutch plate itself could be done. I own and have owned xtd products they have never failed me before. First thing I would do is recheck your slave cylinder and make sure all the air is out. but sounds like that you have fried the clutch from it not fully engaging.

 

[d16y8skunk2]

i think you are right i have checked everything and thats the only thing that makes sense this sucks i wish i would have known to change the master and slave when a clutch kit is getting replaced this is a $500 dollar lesson i wont forget. thanks guys for all the help