Blayze2010's EJ1 build

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Changed out the throttle bodies and ran the wires for the map, starts up and runs a lot better. Its still throwing the map code for some reason so ill have to look into it further. Also its idling up at like 1500 rpm so ill have to mess with that also. But at least its drivable now.
 


ReedMann

New Member
Registered VIP
5+ Year Member
Changed out the throttle bodies and ran the wires for the map, starts up and runs a lot better. Its still throwing the map code for some reason so ill have to look into it further. Also its idling up at like 1500 rpm so ill have to mess with that also. But at least its drivable now.
That's good to hear. Now its just an issue of working out the kinks. Have you bled the cooling system yet? That could help with the idle.
 

mymmeryloss

RHD is where its at
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Gettin closer!
 


Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Figured out a little more. So I wired up the wrong wire for white on my map senor plug. Had no voltage on the signal wire so I looked into it further and the schematic said it was a white wire coming out of the ecu. So I got to looking and instead of being a white wire it was pink/white for some reason. Switched those wires and no more code 3. Runs better but still has a hunting idle so im going to clean the IACV and try bleeding out the coolant more tomorrow.
 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Thanks, really killing me getting this close and still have all these bugs to work out. It goes along with it though. Not to mention the car has different problems with some interior things (passenger window inop, power locks inop, gauge lights inop, etc....) Bunch of different crap ill have to figure out later on.
 

emerican

New Member
Registered VIP
thats what modded cars do man is have problems same with track cars
ive gotten really lucky with mine even with all the stuff ive changed and done i havent had any problems not on wood
besides the normal stuff gaskets needing to be replaced etc nothing has happened with the civic thank god
 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Got most of the bugs worked out, only thing existing is the code 6 coolant temp switch, but only causes the fan to run all the time so ill figure it out with some time. Got an alignment and been driving it today. Heres some pics. Still have some trim to put on.








 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Thanks, still tons to do. Cant wait to slam it and start on bodywork/paint!
 

Blayze2010

5th gen lover
Registered VIP
5+ Year Member
Yeah I already have mine practially spent, Paying off credit cards, getting a storage building and a lot of parts lol
 

mymmeryloss

RHD is where its at
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Mine is going straight into savings...

f**k getting old and wise...
 

young_

out on bail
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Lookin good!

Definitely will look better with a drop. So how's that clutch?


Sent from my iPhone using Tapatalk
 


Top