In for the finished product!
How's this for a tease?
Sure thing man. Let me know if you've got any more questions.
1997 DX hatch
- Thread starter ReedMann
- Start date
Ballin!
Where did you get the sleeving?
Check post #977. Those are all the links for the stuff I use to do my wiring. I get it at partsexpress.com. They are a great site.
Ah my bad, didnt notice it. Thanks, I plan on going back an redoing my harness with that stuff.
Thanks man!
No big deal. If you have any questions let me know, I'll help you out.
I am working on it as we speak haha
Still waiting for that finished product!
That looks amazing!
Thanks guys. I always saw places that sell harness (Rywire, Wireworx, etc) do zip ties like that but I never understood why. I did my engine harness and didn't use zip ties and eventually the heat shrink will stretch at the breakouts. So I decided to try zip ties, like the pros do, on this harness.
I know exactly what you mean. It is so satisfying to have a nice, neat, completed harness. My engine harness is terrible in comparison so I'll definitely be redoing that.Ballin! Looks amazing! I loved doing my wiring harness. Feels really rewarding and it looks so good even after the first wires. Keeps you pushing forward seeing the cleanliness as you go!
I too also plan on redoing mine. I need to get a better heat shrink. Ive seen some guys double up there heat shrink. Cut a size to cover the loom and wire. Then use a slightly bigger diameter and longer and then cover that up! I just need to redo a small bit of mine!
I usually do electrical tape then cover that with heat shrink. Depending on the size/number of wires in a grouping and the size of the pins it can sometimes be a pain to get the heat shrink over the pins and onto the wire. You definitely learn a lot by doing it once though.