Looks good man
Appreciate it man!Looks good man
Thanks bro. I used Turtle wax, but I also wipe the bay down here and there cause it blows not having wheel wells. Rocks and sand are more of a problem than dirt. There are always imperfections that I wish I could fix right now..No kidding! I wish my bay's paint was in that good of shape, its faded so bad and dull, I just wipe everything inside the bay down with a rag and f21 turtle wax tire shine, since it dries with a flat finish. Dirt just rinses off.
Thanks man!Nice work, super clean car.
Tapatalk'n from my Desire HD
I have an ex model for reference. there was no need to undo the battery but for safety it could be wiser than not to do so when working with electrical components in your car.How did you do the no SRS light?
Preordered in January 2012 and received late May 2012. Ordered them through Next Level Motoring.where did you pick up the 531's from i want the same wheels and how much for the wheels if you dont mind
I pretty much use it everyday too. It's sturdy. Don't have a comparison to The Works Bell but I want good parts for my car so I listened to a fellow with an ek for this one.Should let people know that the lower end quick releases aren't designed the same and tend to not come with the resistors like Works Bell has. You pay for quality with Works Bell
Thanks!Good write up!
I love the wood grain look with the red and all. the only thing that bothers me about the wheel is the horn button. First it was a b**** to fit in the hub and took some light grinding on the corners of the triangle spring part behind the horn to fit it in. second the horn symbol is not centered below the Nardi blue rectangle. It is slightly cocked to the right which gets on my "ocd'ness" a bit.I like the nardi wheel a lot! I want one really bad! Gonna do my interior mods last though.
I will get around to that soon like monday for you. When I did this I didn't have the thread yet. next to that It was hard for me to even find the right info for this simple light delete. I took a stab in the dark and it worked and now I understand it so.. yay!Sounds like you know your stuff, good write up! Post some pics ASAP.
I daily drive with mine and i simply forgot i used the resistor, but i know when i initially installed it i didn't use the resistor, when back and put it in like the instructions say (although I'm Japanese) and then i had to just restet the computer get the light back off.I pretty much use it everyday too. It's sturdy. Don't have a comparison to The Works Bell but I want good parts for my car so I listened to a fellow with an ek for this one.
I used my brother's account (blakej8) before to ask you how you wired yours but if I remember correctly you said you just had the ECM reset or something and it worked for you right? Well mine took a combination of the reset and the resistor. It took me a week or two to grow a pair and play with electrical stuff because I'm pretty scared of the wire and electrical work with cars, in fear of setting something up wrong that can't be reversed and having a setback.
I know it isn't too bad to do once you've done it before but I would just hate to mess up. there is a first time for everything, and if the research is done properly things should go pretty smoothly.