My new Daily!
- Thread starter BADFISH
- Start date
Roelekhatch
New Member
Looking good sir and nice progress so far!
I don't have leather seats, but I painted my A and B pillars black, and wrapped my headliner in black. There are pictures in my build thread.
Curious to see how your powered USB and audio input turn out! That's a cool mod!
monstahtron
New Member
nice pickups! Also question, how are you turning the cassette player into an aux 3.5mm jack lol? I'm definitely interested in doing the same.
You solder wire's onto the head of the cassette player, should need two wire's. I've not finished it yet so couldn't tell you for sure which one's. I do know there is 5 wire's coming from the head of my cassette player. You're best bet would be to solder 5 wire's to the head and use process of elimination to figure out which one's are what! all your looking for is the left and right audio signal's. Next, figure out which switch tell's the system when a tape is in the deck. if memory serve's me correct there was two switches in my player. Then sold a wire in place of the switch so it thank's it always has a cassette in it.
Test fit the wheel's today!
Don't mind the back... but something gotta give up front sit's way to high. Should I go with a bigger tire (195/55R15 in the pic, maybe buy 185/65R15 instead) or lower the front? Need any and all idea's to make it look right! If I lower only going 1-"1.5"!
Also, gave up on turing the cassette player into an aux and order a Blitzsafe Auxiliary Adapter.
Next week I'll be ordering new tire's, center caps, and Lug nut's. Getting the clear coat off the wheel's has been a bit**! I will say the curb rash definitely better than expected!
Don't mind the back... but something gotta give up front sit's way to high. Should I go with a bigger tire (195/55R15 in the pic, maybe buy 185/65R15 instead) or lower the front? Need any and all idea's to make it look right! If I lower only going 1-"1.5"!
Also, gave up on turing the cassette player into an aux and order a Blitzsafe Auxiliary Adapter.
Next week I'll be ordering new tire's, center caps, and Lug nut's. Getting the clear coat off the wheel's has been a bit**! I will say the curb rash definitely better than expected!
hard at work on the wheel's! Got most of the curb rash knocked off, all the clear stripped, and two of the wheel's at 150grit. still a few spot's on both that need touched up one more than the other... then hit all four with 320 grit, 400 grit, & wheel polish! After that painting begin's! back and inside the spoke's are going gun metal then clear coating! some up close pic's of what I started with in where as well!
before
Progress so far, still have alot of work left!
before
Progress so far, still have alot of work left!
monstahtron
New Member
Damn the wheels came out clean, keep em comin!
Nice! How's the 5speed swap coming?
