My EJ8; my slow build.

crash!

Avi, pull your socks up.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
I'm getting power to injectors but no pulsation. Any ideas? I'm lost.
 


buzzbombtom

captin sleep0
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
fuel pressure? how does the main relay look? lots of things, i saw your fb post with like a billion replies, i dont want to stab in the dark.
 

crash!

Avi, pull your socks up.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Compression and fuel pressure are fine. Ecu worked fine before I pulled the motor.
 

buzzbombtom

captin sleep0
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
hows your ground on the transmission? and what about the main relay? or what about the coil, what is it producing? what about your cam position sensor or crank position sensor?
 

TokyoSkies

Boost Junkie
Registered VIP
5+ Year Member
I would double check all relays/grounds. If you have no pulsation, or rather no complete current, then something is blocking the signal path. Either a bad wire (really hope that's not the case, could be a goddamned nightmare), or a break in continuity, I.E relay or fuse. Break out a voltage meter!
 

buzzbombtom

captin sleep0
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
i kinda know my s**t ;) just dont really venture into these gawdy tech threads, because they are more stuffy and less fun
 

TigBitties

Frame Bangin
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
if you do what i said you should find it. basically told you whole fuel circuit
 

crash!

Avi, pull your socks up.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
:cussing: SERIOUSLY.

It could have been worse, I just felt like a dumbass.
 


Top