Turbo Rotary Mazda Minitruck Build
- Thread starter mymmeryloss
- Start date
fuel cell wont get damaged sittin back there and draggin frame?
I am hoping that i didnt go overboard with it
Seems to be the spot that pretty much everyone mounts it. Theres really not many other places to mount it.
Its not mounted yet, but the same thought came into my head when i set it back there but i built the frame the way i did so i could put the tank back there. We shall see what i come up with.
Basically would have to replate the bottom. Not planning on dragging through this frame though.
Last edited by a moderator:
bonerrr
This.
Word. Well i got some stuff done yesterday after work. Fina get in the garage here in a bit. Gotta work through this hangover. Its crunch time!
those ball joints, jesus f**kin a christ i need some in my life
that would be his right front corner of the truck aired out
and the upper control arms angle on the ball joint is way steeper than anything our cars can handle
how much camber will this setup go to now?
90 degrees _-_
my front end is complete and i have steering and bags up there also.Those arent your typical ball joints. Those are 1" uniballs on the upper arms and 3/4" on the lowers. Check out the price tag on those b****es lol.
I wanted jeebus joints, but didnt see the need.
About 8* in the front and 10* in the rear at the moment. But i made the rear adjustable and i can also shim the front if i need to. I want matching camber front and rear.
20 more days...
Last edited by a moderator:
i hope you plan to show off all the tubing, or it seems like a waste