lol I use that stuff at work all day and have a degree in it. It catches my eyeforged 4340, good eye the digital vernier i got locally was less than 9 bucks.
What do you guys say is stronger and reliable? I or H??
- Thread starter sleeper si
- Start date
what did these run you then? had to be dirt cheap since you can get titanium rods for near a grand
but I'm also confused as to why three sets, you wouldn't be able to just swap them out. ratios would change so you would need another tune and the ring seating on the cylinder walls will change
obviously i get made in china when in china lol! just needed something to verify the rods.
okay i had a few members asking me about the weight for the rods,
here you can see just one rod weighs approx 490 grams and the 2 rod bolts weigh 52 grams, so the total weight for the rod and bolts is 541 grams.
here you can see just one rod weighs approx 490 grams and the 2 rod bolts weigh 52 grams, so the total weight for the rod and bolts is 541 grams.
I think I have understanding of two because you have 2 motors but the third is still up in the air.