Transmission in gear but all gears seem like neutral

[bkutsch87]

Finally some help! Ok well I was down shifting to third gear and every gear seems like its in neutral. I put a new clutch today and it and didn't do anything. I start it and put it in 1st-5th and I can let the clutch out and car doesn't do anything or go anywhere. It stays idle to while I'm in gear with clutch out. Please help have a job interview next week. Thank you

axels seem fine to

 

[lethal6]

Going to have to troubleshoot some more than that. You don't really give much information to go off of. Is the shift linkage attached still? Does it make any sound when trying to engage a gear? If the linkage is intact, then you have something internal in the transmission that has become detached. What were you doing when it this happened? Just driving normal?

 

[sleeper si]

what was your procedure in detailed when you put in a new clutch?
did you verify the pressure plate surface and flywheel surface? the fingers on the pressure plate? etc....

 

[Osiris19]

Make sure the fork is actually engaging and disengaging the clutch. It sounds like when you put it all back together, you must've messed up the reinstallation. Is the rod on the slave contacting the fork?

Sent from my Nexus 7 using Tapatalk 2

 

[bkutsch87]

yes i did everything right putting it back toghter. iwas down shifting to3rd from 4th .high rpms .linkage seems fine. i put in brand new basket . pressure plate. throw out bearing as well. seems normal when putting in gear. before i took tranny out it made a noise while it was in gear. with clutch out like 2/10 loud noise like the plate wasnt grabbing. ijust hope its not my gears. what do you mean fork? the spindle?

 

[bkutsch87]

all i know is its doin the same thing but no noise. ithink i shortned the starter to cuz i forgot to disconnect battery and my wedding ring got burnt in my skin.freakin hurts

o sorry i know what you meant yes it is engaging and blead the clutch

 

[Osiris19]

What year, model, engine and trans do you have?

Sent from my Nexus 7 using Tapatalk 2

 

[bkutsch87]

2000.ex? i think . d15 motor. how can i find what kind of transmission. btw my speedometer has been jumping alot is that a sign? vtec works sometimes. illl talk about that later want to figure this out first . ireally appreciate the help ty so much

 

[bkutsch87]

on trannny i see a vin number and k4a? does that help?

 

[bkutsch87]

j7 heads

 

[Just a honda!!]

If its a 2000ex u should have a d16y8 and that car is obd2-b, u would know if it was your gears im guessing that u reinstalled the tob/clutch fork wrong

 

[Osiris19]

If its a 2000ex u should have a d16y8 and that car is obd2-b, u would know if it was your gears im guessing that u reinstalled the tob/clutch fork wrong

This. Your clutch isn't being engaged at all. Pushing the clutch in pushes the fork against the pressure plate and grabs the clutch to the flywheel. It sounds like the fork isn't moving the plate at all.

Sent from my Nexus 7 using Tapatalk 2

 

[sleeper si]

This. Your clutch isn't being engaged at all. Pushing the clutch in pushes the fork against the pressure plate and grabs the clutch to the flywheel. It sounds like the fork isn't moving the plate at all.

Sent from my Nexus 7 using Tapatalk 2

correction:
pressing on the clutch pedal sends fluid to the slave, which in turn pushes the fork against the many fingers on the pressure plate and disengages the clutch.

 

[Osiris19]

correction:
pressing on the clutch pedal sends fluid to the slave, which in turn pushes the fork against the many fingers on the pressure plate and disengages the clutch.

Well yes, I left that part out lol. That's why I asked him if the slave rod was contacting the fork. Cause that's where I would look. Check to make sure your hydraulic system is working.

Sent from my Nexus 7 using Tapatalk 2

 

[bkutsch87]

yes i installed it right the hydralic fork is working and pressing the clutch.i even blead it to make sure

 

[bkutsch87]

the tob is connected behind the fork i nstalled it right.

 

[bkutsch87]

motor says d15

 

[bkutsch87]

the problem is my gears arnt catching whatever its suppose to contact with. im not to great w cars but i know a little. all i know is when u put it in gear it will coast like its in neautral. every gear. i hope i make it to my pipeline interview wednesday

 

[Osiris19]

Is the car driveable at all? I'd say take if all back apart and go over it again and make sure you didn't ,iss something.

Sent from my Nexus 7 using Tapatalk 2

 

[obracer12]

did the b***h pin fall out?