Well he wants wheels for his new EvoThis will be my first bike.
So then it's not free lol
Sent from my iPhone using Tapatalk
My EJ8; my slow build.
- Thread starter crash!
- Start date
So then it's not free lol
Sent from my iPhone using Tapatalk
Bought the bike. Got the new 520 conversion on there.
News on the coupe: dropped the head off at the machine shop to get re-surfaced and the valve stem seals on (since they have to take everything out anyway). Will be picking that up soon. Bottom end is ready to go back together.
News on the coupe: dropped the head off at the machine shop to get re-surfaced and the valve stem seals on (since they have to take everything out anyway). Will be picking that up soon. Bottom end is ready to go back together.
I don't even know what you're talking about!
How have you been anyway? Long time homie.
He's quite fantastic! I'm so excited to ride it again. But it's supposed to rain decently hard for the rest of the week 
Thank you!
He is quite purdy. And his name is JARVIS (since I name all of my vehicles).
Civic - Jack
Integra - Buster
R6 - JARVIS
God I'm such a loser.
Correction a loser with beautiful cars and a bike.
Sent from my iPhone using Tapatalk
D'awwwwwwwwwwwwww
Buster's really not that beautiful. But don't tell him I said that. 
A couple small updates:
- block is finally together. Just need to put the transmission on and put it in the car.
- ordered a Mishimoto magnetic drain plug for break in
- FINALLY got the head back from the machine shop. Turns out I had a bent intake valve. So they replaced that and checked all the valves along with resurfacing and checking the head AND installing my SuperTech valve stem seals It's good to go!
Ooopsies!
- block is finally together. Just need to put the transmission on and put it in the car.
- ordered a Mishimoto magnetic drain plug for break in
- FINALLY got the head back from the machine shop. Turns out I had a bent intake valve. So they replaced that and checked all the valves along with resurfacing and checking the head AND installing my SuperTech valve stem seals It's good to go!
Ooopsies!
When do you plan to install the engine?