head gaskets

[delarn]

i just replaced my head gaskets back in august but today my coolant reservoir started boiling again i need to know the best place to by a reman head an the best brand for gaskets that can take the most pressure this is not a racer its just a daily driver please help 1.6 non vtec


Sent from my iPad using Tapatalk

 

[jonsey1886]

FEL PRO gaskets for any honda

Also get a copy of the FSM and follow the head gasket replacement procedure.

 

[Diana Nam]

i just replaced my head gaskets back in august but today my coolant reservoir started boiling again i need to know the best place to by a reman head an the best brand for gaskets that can take the most pressure this is not a racer its just a daily driver please help 1.6 non vtec


Sent from my iPad using Tapatalk

you might have a warped head. i would get it re surfaced at a local machine shop not to expensive to get done at all

 

[delarn]

ok when I got the head done back in august an had to get a shim so its done


Sent from my iPad using Tapatalk

 

[XpL0d3r]

FEL PRO gaskets for any honda

Also get a copy of the FSM and follow the head gasket replacement procedure.

^^ 100% agree

 

[Diana Nam]

ok when I got the head done back in august an had to get a shim so its done


Sent from my iPad using Tapatalk

it doesn't mean anything you can still warp the head or the gasket used was just no good to begin with. its going to be one or the other either ways. being that you did your head back in august

 

[delarn]

ok i talked with a few honda guys in my area an told me to pick vtec head what do you guys think D17y8


Sent from my iPad using Tapatalk

 

[Diana Nam]

You can just need to get vtec ecu