Oil leak at dipstick

[_shakademos_]

My dip stick is spitting oil why is this happening how do I fix it!!!!!!!!!!


Sent from my iPhone using Tapatalk

 

[HeX]

What do you mean its "spitting" oil? Is the dipstick not seating correctly? Is it damaged? Are you sure you dont have too much oil? Pictures might help.

I changed your title because "help" says nothing about your issue and deters interest. Always use a short yet relevant title.

 

[XpL0d3r]

Could be the seal around the dipstick, or, something is clogged up somewhere and the system can't vent properly... like a PCV valve. If pressure builds up, it's going to release via the least path of resistance, aka through the dip stick.

 

[_shakademos_]

My dip stick is spitting oil why is this happening how do I fix it!!!!!!!!!!


Sent from my iPhone using Tapatalk

I checked that pvc not clogged it's sucking


Sent from my iPhone using Tapatalk

High engine mileage and worn piston rings?

Yea it might be that and it's boosted 2 so even more stress u think it's better to rebuild it or swap it


Sent from my iPhone using Tapatalk

 

[XpL0d3r]

Maybe this thread can help you out? Good discussion going on in there.

 

[HeX]

...and it's boosted 2 so even more stress u think it's better to rebuild it or swap it

These are details that should've been stated in your opening post. Is there any other pertinent info you haven't shared?

 

[_shakademos_]

I looked a little closer and it looks like the wall is leaking


Sent from my iPhone using Tapatalk

 

[HeX]

I looked a little closer and it looks like the wall is leaking

Unless you engine was built in the Amityville house, I believe you're referring to the head gasket leaking.

Being that you have yet to answer any of my previous questions, are you sure the oil isnt leaking from elsewhere, such as the right side of the valve cover, and dripping down that way? Wipe off all the oil drippage then reinspect everything after a drive or two and try to identify the leak source.