AC Unit Moved. Check this out.

[Tap it]

i moved the ac unit on my 96 civic below next to the cupholders. took me about 2 hours to do and it was fun.
my plan is to mount a block off plate in its place and then later on i will drill holes for guages.
so far everything turned out great. updated pics page 1 at bottom

just starting to take everything out.

got everything in

i was going to go with a h22 but at the last minute i changed my mind to go with a b18c1. engine has been ordered through my buddies shop and after thats in ill spend some money on some nice defi gauges to match my si cluster.
hope you guys likeit. tell me what you guys think

 

[cole]

i like that idea alot , i dont use ac realy so that would free up room for something elts closer to your feild of vision. is it a nice fit or is there gaps or what?

 

[cgpEJ6]

yeah id really like to see a clearer picture to see how it fits, hopefully you can come up with something good for the block off plate.

 

[Tap it]

i like that idea alot , i dont use ac realy so that would free up room for something elts closer to your feild of vision. is it a nice fit or is there gaps or what?

yeah same here i rarely use it. its a good fit. i didnt have to fab anything up at all. i might do a DYI on it since i took quite a few pics. yes, there is a small gap on each side that isnt increadibly noticeable. im thinking of trying to find something that will fit in there but nothing comes to mind.

yeah id really like to see a clearer picture to see how it fits, hopefully you can come up with something good for the block off plate.

i will def take clearer pics tomorrow when there is light out. i just finished that when i posted it. yeah iv got a couple ideas, just need the cash. hehe

thanks guys!

 

[soswank]

good diy. i think you might even get a sticky if you do a good write up WITH LOTS OF PICTURES !

 

[D Grade]

Defi D-series gauges are the s**t:

Those were taken while they were in my Talon, and like the Si gauge cluster, the DSM gauge cluster is a bright/deep amber. These gauges matched PERFECT, and you'll love them.

And since I did all my gauge lights in amber, I plan on sticking an oil pressure and a fuel pressure gauge in the Rex after I get a pod and an AFPR.

BTW, great job with that project. Looks clean and looks very different.

 

[qwikxr]

coolness.. lets see them relocation closeup shots!

 

[soldiaboy]

that does look nice, get the pics up pronto

 

[Blazed]

looks hot..
did all the wires reach or u had to extend some?

 

[Vicious]

looks hot..
did all the wires reach or u had to extend some?

good question i'd liek to know too sounds like something to do on a boring saturday you know what i mean.

 

[Tap it]

good question i'd liek to know too sounds like something to do on a boring saturday you know what i mean.

haha yeah.
everything reached perfectly.all you have to do it pull on them a liitle bit to get an extra inch of room but everyhting was plug and play. ill have new pics up in a couple hours.
i might even have a block off plate in by then but i doubt it.

 

[Vicious]

alright thanx for the info you gonna make a how to?

 

[Tap it]

yeah i will, but first im finishing up my home made block off plate. pics will be up soon

 

[Tap it]

updated pics:

and my radio block off plate instal. hella temporary, just wanted to put something in there.

i dont like the gap... but right now its fine untill i can shape a piece of aluminum to the exact fitment.

 

[RainyDaze]

Damn, that is a pretty cool idea. I would have never thought of that, Although it wouldn't work on my car. Looks good from what I can see.

 

[Jezek]

haha i like it down ther....hella cool

 

[white2000]

cool, wish I couls do something like that in mine. forkin 2000

 

[Tap it]

thanks guys.
seriously, you dont even know how easy this was.
ill write up a DIY later on when i get back.
-brian

 

[1999stockaccord]

looks great man, cant wait to see the finished product

ill soon be relocating my cd down in that pocket once i get my 6th gen console in...

 

[radarblips]

Oh s**t, that's pretty cool man, first time I've seen that done.