I will be parting out my 2000 Honda Civic Silver Coupe, If anyone is looking for parts for a 96-00 Civic email me Proco2K@verizon.net
OR HIT ME UP ON AIM SN: DJKRAIZ
OR HIT ME UP ON AIM SN: DJKRAIZ
*!*!*!* Attention: Parting out 2000 Honda Civic EX *!*!*!*
- Thread starter jdm00civicex
- Start date
is it a dx?jdm00civicex said:I will be parting out my 2000 Honda Civic Silver Coupe, If anyone is looking for parts for a 96-00 Civic email me Proco2K@verizon.net
if it is id like to buy the ecu.
Most of the Aftermarket and JDM parts stolen.....it is an EX but they left behind the 99-00 P2T Civic SI ECU....only thing aftermarket left on it is the front/rear camber kit, and Greddy EVO with 2.5inch custom piping....I have complete doors with power windows/locks, hood, fenders, trunk lid, rear bumper, radiator support, air bags, seats, seat belts, dash, cluster, stock shock/springs....
I could use the passenger visor clip that holds the visor in place. How much to 07035? Also the sail panels and tweeters.
They stole the sail panels along with tweets and side mirrors...but let me pull out the passenger visor clip..and will let u know96greencivic said:I could use the passenger visor clip that holds the visor in place. How much to 07035? Also the sail panels and tweeters.
Got a P28 ECU Chipped with Datalogging Cable and an OBD2B Jumper Harness. This ECU will work with a 92-95 Civic/Integra and 99-00 Civic/Integra with the OBD2B Jumper Harness(included). To make it work with 96-98 Civic, it will need a OBD2A Jumper Harness. Good for N/A or F/I. ECU has the following functions:
** Custom Tuned LS/Vtec Maps **
** Built-in 2-Step Rev Limiter **
** 2-Step Starts @ 4000 Rpm **
** Built-in Shift Light **
** Shift Light @ 8300 Rpm **
** Redline @ 8500 Rpm **
** Vtec @ 4400 Rpm **
** No Speed Govenor **
** USB Datalogging Cable **
** Datalogging Cable used to monitor Real-Time Fuel/Timing Ratio and Air/Fuel Ratio **
OBD2B Jumper Harness
USB Datalogging Cable (To monitor live Timing/Fuel and Air/Fuel Ratio)
*!*!*!*!*!*!*!* Taking Offers *!*!*!*!*!*!*!*
If interested or any , feel free to email me Proco2K@verizon.net
** Custom Tuned LS/Vtec Maps **
** Built-in 2-Step Rev Limiter **
** 2-Step Starts @ 4000 Rpm **
** Built-in Shift Light **
** Shift Light @ 8300 Rpm **
** Redline @ 8500 Rpm **
** Vtec @ 4400 Rpm **
** No Speed Govenor **
** USB Datalogging Cable **
** Datalogging Cable used to monitor Real-Time Fuel/Timing Ratio and Air/Fuel Ratio **
OBD2B Jumper Harness
USB Datalogging Cable (To monitor live Timing/Fuel and Air/Fuel Ratio)
*!*!*!*!*!*!*!* Taking Offers *!*!*!*!*!*!*!*
If interested or any , feel free to email me Proco2K@verizon.net
how much u want for the radio bezel, without the controls just need the surrounding part... we could meet up sometime if u want...
let me make sure this weekend it is in good condition and that they (F**kers) didn't break anything off it, and will let u know....Machinehead115 said:how much u want for the radio bezel, without the controls just need the surrounding part... we could meet up sometime if u want...
ok cool
If you need this part, DO NOT remove the vents attached to the bezel. They will not go back on (they're melted on).Machinehead115 said:how much u want for the radio bezel, without the controls just need the surrounding part... we could meet up sometime if u want...
How much shipped to 98501 for the steering column knuckle and the hood release cale (full cable, including handle)? Also the hood latch.
Oh, and it might not be a bad idea to list the color of the car and the color of the interior (the interior color code and paint code is inside the driver's door).
Do you have picture of the shift light ? what brand how much ?? pm me or send pics to cruz_b@hotmail.com
Shift light is built into the ECU meaning when the RPM hits 8300, the Check Engine Light is used as a shift light and will come on right before it redlines.....imbcruz said:Do you have picture of the shift light ? what brand how much ?? pm me or send pics to cruz_b@hotmail.com
Hard to find a Chipped P28 with all these options...even on EBAY........
i dont know about selling the door handles...cuz im looking for a buyer who wants complete doors for conversion........xdr3amx said:how much for the painted molding and door handles? maybe even side skirt?
i'll keep your order in mind...and will take full pics and send them to u to make sure its the right stuff you are looking for and will give u price as well.............FireEMT8572 said:looking for...
Complete heater core Box
Complete Blower Box
Heater core harness (should be attached to the Heater core)
Center Dash vent
shipped to 19540, I wanna do the 99-00 center console, i can get ahold of the controls