~~EM1 "Build" {00_Civic_Ex}~~

00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
I found my coolant leak actually. It's from the top of the coolant reservoir.. like the cap thing. It sprays out when it gets to a certain temp.
 

TigBitties

Frame Bangin
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
That works lol
 


00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
Here's a couple pictures of the carbon kevlar to clarify.. Nothing to update lately, only thing is I got my car licenced.


 

95coupeWI

New Member
Registered VIP
Cute stuff^ now goodies or else... :x
 


00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
Well faaaak, was driving home yesterday and this happened.. I know its shitty welding, but it was supossed to hold up a bit more than it did..

 

CHILD

All Day, All JDM
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Free flowing exhaust :shrug that sucks. Clean up that flange this time and get the welds right this time around
 

00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
Only good part about this, when I had to drive home... the turbo was sooo damn sexy sounding :drool:
 

K-N-2-EK

.
Registered VIP
5+ Year Member
Bought<built s*** like that is preventable...and for those welds..they didnt even penatrate the surface you could pry knock that weld off with a screw driver...no hammer needed. sorry about the mishap but you shoulda never half assed it
 

00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
Annnnnd, the build part begins! Story as it goes..

I was at a local cruise with tons of people. Part of the cruise was on the interstate. I was about 2 miles onto the interstate going 60 when I go down a hill throwing it into neutral, and my car shuts off. I pull over to the side of the interstate with hazards on and all, and when I turn it back on.. It sounds like a cammed LS1 camaro. I call a tow truck and now here we are 1 month later.

The bottoms of my spark plugs are covered in oil, and car doesn't wanna start. I'm thinking toasted rings or toasted pistons? Anyones advice will help. Thanks!
 

00_Civic_Si

BrokenEM1
Registered VIP
5+ Year Member
Decided to have some fun before winter, and painted the slips Metallic Silver! Let me know your opinions. I'm legitly considering keeping them silver and getting them powdercoated in the Spring. :lol:

 


Top