endo617's 98 Civic LX Project: Balance
- Thread starter endo617
- Start date
I decided to give LED lights a try, I've been noticing new semi trucks are starting to use them and they look bright.
had to match the headlights lol
Those cones in the picture are like 60 feet away, they started sort of blue
They are a nice bright white now
Getting fancy with some Cam Gear bolts
Pushing the intake to the limits.
had to match the headlights lol
Those cones in the picture are like 60 feet away, they started sort of blue
They are a nice bright white now
Getting fancy with some Cam Gear bolts
Pushing the intake to the limits.
As I was taking the springs off my Koni G/C setup, found one of the front Koni was leaking oil from the top dampening adjuster. I contemplated sending it for rebuild but i was better for me just to buy new ones. Springs came in to, but I needed those. My total for everything is still under msrp and now I have spares.
Just wanted to see the freshness
These sold fairly quickly, im going a different route
Decisions, decisions....
Just wanted to see the freshness
These sold fairly quickly, im going a different route
Decisions, decisions....
Sold my RMP Drag reps and bought new 1320 Performance Toda style header, I'm planning on going full size radiator and these make the most reliable gains when it comes to HP.
New Bosch EV14 550cc injectors.
Fuel Rail adapters
They fit perfectly
My GSR block is in my trunk ready to go to the shop. RaceTek
New Bosch EV14 550cc injectors.
Fuel Rail adapters
They fit perfectly
My GSR block is in my trunk ready to go to the shop. RaceTek
Keep an eye on the welds on that 1320. They have a very high crack rate. I'll assume they flow similar to the PLM Toda rep, so yeah, def a good header. I had the PLM version for a few years. Toda rep is def a good decision! After selling my fuel line tuck kit, I may end up with one again...lol. Finding a good spot for the Endyn breather is a chore.
Hell yeah, keeping an eye on them, but these look solid
Bad News tuner. Block bore is uneven and ringland was crack #nevergofullsubaru
USCAR to obd2 clips
Ordered my big boy brake pads. Wilwood Polymatrix B
Shout out to Downstar Inc.They made sure my stuff didn't get left on my mailbox which has been a never ending battle with the Postal Worker.
fixing my shock towers eventually
I lost this damn wastegate block off for month
Took delivery of my new engine. 98 spec Integra Type R long block
fixing my shock towers eventually
I lost this damn wastegate block off for month
Took delivery of my new engine. 98 spec Integra Type R long block
Reman +98 Integra Power Steering, no mods needed. Direct bolt on.
My NGK Power Cables were FILTHY from being on the GSR. WD40 cleaned them up nice.
Had this laying around, actually looks really close to the OEM 98 Spec Faux carbon cover.
Feels good to be making progress on both cars.
My NGK Power Cables were FILTHY from being on the GSR. WD40 cleaned them up nice.
Had this laying around, actually looks really close to the OEM 98 Spec Faux carbon cover.
Feels good to be making progress on both cars.
RHD harness sold in less than a day, paid for my block inspection
Block walls are still good, need to be bored. Not sure if to sell or keep it.
Never go full Subaru
Sometimes I like rice
Replacing the Alternator pulley also, used an O2 sensor tool and a 10 mm.
New ITR oil cap and ASR radiator mounts for my full size coming in the mail.
Block walls are still good, need to be bored. Not sure if to sell or keep it.
Never go full Subaru
Sometimes I like rice
Replacing the Alternator pulley also, used an O2 sensor tool and a 10 mm.
New ITR oil cap and ASR radiator mounts for my full size coming in the mail.
Looking good! I've been thinking about a PS cooler myself...for a while...lol.
I was looking for an OE integra one for a while but all were over priced and beat. Hayden 1009 is only $20 and really lightweight.
Yeah, I was looking for the OEM R one, but they are hard to find. What you have is probably better anyway with the cooling fins, vice just the U pipe of the OEM. Might have to pick one up while its all apart still.
Look into the Hayden 1010, the one I have will work but its smaller than I thought
Fancy breather box plug. I just have a cheap hardware store freeze plug tapped into mine, with a little HondaBond.
I had that on the GSR but I thought about if I ever need to go back its going to be a pain to take out in the future. Dorman ones work, nothing wrong with that.