fmu?

[TiiM iiS l3eAsT]

when u run a FMU do u have to change out ur injectors? are you supposed to?

 

[Steven.]

if you have a chipped ecu, usually you dont even need a FMU.

the FMU rasies the fuell pressure as bood presure goes up. just get some 390ccs and call it a day.

 

[qwikxr]

If you need an FMU, lemme know..

Ive got the FMU and MAP bleeder for sale.. I used these on my stock ECU and stock injectors on my turbo system until I stepped up injectors and ecu chipping..

 

[watisjdm]

u shouldnt have 2

 

[TiiM iiS l3eAsT]

If you need an FMU, lemme know..

Ive got the FMU and MAP bleeder for sale.. I used these on my stock ECU and stock injectors on my turbo system until I stepped up injectors and ecu chipping..

yea thats what i wanna do...i wanna run a fmu until i get a chipped ecu.....i was just wondering if its better to have bigger injectors with the FMU other than just the FMU by itself?

 

[Steven.]

hell i can get a PM6 chipped for about $40

 

[stealthy]

chip your ecu. period.

 

[Steven.]

chip your ecu. period.

werd best way to go, lik ei said, find a 90-91 Civic PM6 or PR4 and i can have it chipped for around $45(socket and shipping, i should have a spare chip around) let me know, cant go wrong with chipped ecu.

 

[TiiM iiS l3eAsT]

alright when i get everything together ill go to u green for the fuel management....remember im OBD0

 

[WalterRonny]

ecu chipped FTW.. tune ur ecu for boost for to read pressure in the maf cuz if you not do it.. you will get solid CEL....

 

[TiiM iiS l3eAsT]

idk s**t about tuning....i know what it is....just dont know how to do it...looks to complicated....im only 17 so im not the smartest yet....

 

[Steven.]

im still anewb at it, but im working on it. just find a 90-91 PM6 ecu, OR a 90-91 Integra PR4 both can be chipped with ease.

right now im working on getting my datalog to work with my new ecu.

 

[qwikxr]

you running Crome, Uber or TurboEdit, Green?

 

[Steven.]

turboedit, im still a OBD0 guy, crome and uberdata dosent support OBD0(boo)

 

[qwikxr]

cool cool...
Im running on Uberdata 1.7. I've been playing around with CROME.. may make the switch sometime, just not soon..

 

[TiiM iiS l3eAsT]

i wouldnt mind using those.....but o well.....so how will this go.....i get a ecu and whos gonna chip it? i dont think im smart enough or have the expierence to do it....i know ill f**k it up.....can u make a bin for it? what should i do?

 

[Steven.]

the guy i got it done from did it for $30 but i had to buy the DIP and ZIF socket and chips.
DIP:
http://www.moates.net/d2-28pin-dip-socket-p-59.html
ZIF
http://www.moates.net/s4-aries-28pin-lowprofile-zif-p-46.html

you get the DIP solderd in, the ZIF goes on top of that for easy removal of the chip.

i can make a bin with a base map.

 

[TiiM iiS l3eAsT]

well i dont know if ill ever get it dyno tuned....theres no where around here that has one.....im gonna have to stick with a basemap.....but o well its better than a FMU

 

[john92civlx]

ok i plan on doin a b16c1 swap but im not gonna beable to do that for about 5 months so i wanted to know how hard it would be to chip my stock p06 ecu?

 

[Steven.]

www.pgmfi.org

chaos: you could street tune it, wideband, ostrich, and datalog on a laptop( thats what im goign with)