Just an Introduction for me and my ride

tye

S.T.U.D.
Registered VIP
5+ Year Member
10+ Year Member
Good start man, welcome to the site, enjoy!!
 

d16power

New Member
5+ Year Member
thanks i been trying to find a good forum to join and stay, this looks to be the place..... warm welcomes always help...

people at honda-factor just told me how much my car needed to change.... with the way they were talking i would have needed to rob a small bank.... geez

Thanks again for the warm welcome.
 


chameleon30038

Inquisitive
Registered VIP
5+ Year Member
10+ Year Member
don't wanna knock your car but i'm not feeling the headlights, tail lights at all.
 

96greencivic

#1 in the Atlantic!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
chameleon30038 said:
don't wanna knock your car but i'm not feeling the headlights, tail lights at all.
I like the way the tails light up, but I'm not feeling them in the day light.
 


d16power

New Member
5+ Year Member
the hadlights are souly for the HID kit i have.... with normal headlights i couldn't have high and low beams just one beam. With these projector lights i can have my HID beam and high beams so im good :-)
 

mitcheg6

Deanh22
Registered VIP
5+ Year Member
Not my style, ditch the mirrors and taillights, and like Jez said, get a lip kit, and LOWER IT!!
 

Jibber

New Member
Registered VIP
5+ Year Member
10+ Year Member
not my cup of tea but your car your flavor. although not too bad. :welcome:

did you retro the projectors? cuz i thought that those type of projectors weren't made for HID lighting. i used to have some similar to those a few years back and there was a warning not to use HID's with the projectors.
 

deftone

New Member
Registered VIP
5+ Year Member
10+ Year Member
if you cant get a jack under your car just pull up on a couple 2x4s... i have to use 3 and it barely clears. or if you want to do more work you could take off the front bumper to fit the jack
 

d16power

New Member
5+ Year Member
yeh i had to grind out the bulb housing in order to fit the HID bulbs into those projectors, but the out come of them is amazing ill post pics later on this week. Whoever told you that they weren't made for HID kits is right but with a little modification with a dremel (making the opening more circular and wider) they fit fine, and they have that beautiful white-aqua-purple horizon line bmw's and acuras alike are famous for, not to mention they look great with Halo's, and give out ridiculous amounts of light without blinding :-)

i sell these kits too 6k, 8k, 10k, and 12k - everything for 300 so nice

like i said ill get pics...
 

Mr. Lin

Admiral Ackbar
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
oh dear god no... not the altezzas!!!
 

Jibber

New Member
Registered VIP
5+ Year Member
10+ Year Member
you have no blinding issues with that combo? interesting, i'd like to see pics of the output against a wall
 

d16power

New Member
5+ Year Member
i will deff get yall a picture of the lights at a wall this week. I even have the beam adjusted higher than normal for more light out put and i have yet to have brights flashed at me, or have trouble with anybody else. I think it is partly because of my choice of bulbs. I have 8k bulbs which aren't as bright as 6k which is what they use in stock HID kits like Acura's and BMW's. Those are bright as s**t, mine is more blue-white instead of just bright bright white. Anyways they are really nice and i wouldn't change those headlights out for anything because they were a real project to me. I was dissapointed when they didn't fit when i first got them, cause i didn't know about them not being able to fit in the housing, but happy to take the challenge of making them fit.

I'll get pics soon
 

hkt03

shootin' sparks on i290..
Registered VIP
Registered OG
5+ Year Member
looks interesting.. the gauges look a bit odd but still good, i dont like those headlights and the tails would look better smoked imo.

but it looks decent.. then again, mines nothing either :lol:
 


Top