low and slow

Abailey21

New Member
Registered VIP
5+ Year Member
no, nobody is going to like this because you cheaped out on the one place you should never cheap out on.
 


2slo4u

wait4me
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
There are just some parts that you should never cheap out on. But you won't realize it until your coils rust and break on you. Your shocks most likely will give out too. Spending an extra couple hundred for not only reliability but safety. But as long as you like it then yay
 

Ej8Kid

Too Much Traction
Registered VIP
5+ Year Member
We all learn from our mistakes. I started with cut springs, thats right, I cut it myself. Now I have Koni Yellows + Ground Control lol.
 

CO671

New Member
Registered VIP
One does not simply cheap out performance parts...
You're going to end up spending more when it screws up your shocks and blows them, and by then you'll need a new set of shocks, springs and maybe something else that the coils f***ed up.
 

ekn00b96

New Member
i understand the want to lower your ride dude, but honestly its easier and much more efficient to save that 45 bucks towards some coilovers. doesn't seem like much but it does make a difference, and you'd be much happier. which is why my hatch still sits stock height. i hate it and i think it looks stupid as f**k. but in the end its worth it. even a cheaper set of coilovers like function and form would be better than ebay springs. even aftermarket shocks and springs is better and still cheaper. you could get away with spending 400 on springs and shocks and have a better, more reputable, and more RELIABLE setup. not trying to be a hater or make you feel like s**t, but just offering an opinion.
 

JohnS.

BANGARANG
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
$45 coilovers?



But to each his own. Like it was stated earlier, we all learn from our mistakes.
 

CHILD

All Day, All JDM
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
where is the low part?
Koni/GC or AMR
konia/GC -best bang for the buck..................AMR -all your bucks. No middle of the road suggestions eh? :lol:
 

CO671

New Member
Registered VIP
where is the low part?

konia/GC -best bang for the buck..................AMR -all your bucks. No middle of the road suggestions eh? :lol:
lol all your bucks. I read CSII's are good, but not good for tucking or going low, and Function&Form are good for going low but aren't good quality.
Cosmetics/Interior who cares, buying those brand names are just for bragging rights and a peace of mind.
 


Top