My Usdm Coupe =)
- Thread starter Nine78Guy
- Start date
DIZAM that mo huncher is SLAMMED
its a DIY interior man...costed my a total of $15-20 give or take. $10 for the adhesive spray, and $8-10 for the cloth. I ripped the stock factory cloth off, cleaned the plastic good, and then sprayed the adhesion on both the cloth and plastice....waited for it to dry, put them together, and there you go... cut off any access cloth and put it back together. I had to use screws to attach it back onto the door panel though.amej8 said:Anymore pics of interior? I really wanna do the whole JDM interior red thing but first I wanna get my cluster/CC red and I know that's somewhat difficult for someone not so good with cars. And how did you get the red part on the door? Dye your factory cloth or buy? And where'd you get the arm rest cover in red?
And as always, loving the coupe.
thanks. dropped it all the way down on my omni sleeves. don't cut your lower grill, i cut mines because i think it looks cleaner. and yea, you have to cut it, it is not a scew on scew off kinda thing.
thanks..its a DIY red ctr panels. Dang, i should had written a write up for this.dang i love that interior...howd u do it?.....and that valve cover is awesome ...
amej8 said:
all materials was bought at WALMART. You can find the adhesive spray at the rattle can spray paint/car supplies area. it will say "adhesive spray" and the go to the fabric section of the store and look for some red cloth...the fabric i used had a texture similar to what is on a tennis ball....you can pretty much use any texture you want..as long as it can flex a little...so that it will cover your plastic peice tightly. I'll get pics of the material tomorrow morning along with some more pictures of the valve cover....its late now
i sincerly hope you enter the car show.. those ctr's really stand out very nicely
the day you get some desmond regamasters is the day you have the nicest coupe iver seen seriously
the day you get some desmond regamasters is the day you have the nicest coupe iver seen seriously
ShinsenTuner
CC's Youngest OG
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
I may just have to try recovering my door panels and arm rest after seeing this.
MOD LIST.. ur car is always amazing dude... i love it!!!
BlackHope121 said:
lol....those will have to wait because i am jobless right now, and i need to save up to go back to school, but my bro is getting some spoons for his teg. yay! i can't wait to see them. I might just have to put them on when i take picturs of my car. lol thanks for the comments everyone.... my goal for this car is to keep the car clean, in and out, and keep the style clean as well but build it for track use also.
btw, i just summited my coupe into the car show.
Current mods and Upcomming mods:
I'm a college student so i'm broke like every other
student that don't have rich parents. I work hard
for what I have so far, and I proud of it. Keep in
mind that my car is a budget project, already two
years in the making, lots of future mods still to
come but keeping her clean is what i'm aiming for
right now. New motor comming in the spring.
Honda Civic Coupe(Usdm EJ8)
Current car specs:
Exterior:
Usdm SI/CTR front spoiler lip
Depo Foglight kits(set #2)
Ctr Grill
Jdm EK9 Ctr Headlights/city lights
Oem Stanley amber sidemarkers
99-00 OEM style Rear Lip
Interior:
Del sol seats, but only have driver seat in at the moment
Tenzo R short shifter
CTR stle weighted shift knob
DIY CTR red door panel and center console
Enine:
NGK wires with NGK Iridium plugs
Custome Ground kit-made by my bro it :]
Modified stock airbox
Full Greddy EvoII catback exhaust
Suspension/Tires:
Omni Sleeves (10f/8r) over KYB AGX shocks
Rota Slips(DIY Polish) 15" on Falken Ziex 195/50/15
DIY rear Camber(washer)
Lowered all the way down
Future for my car:
Exterior:
ek Rear Fog light
HID 6000K kit
Repaint
interior:
RSX dark cloth seats or EP3 seats
S2k Gauge cluster
Spoon Duracon Shift Knob
Skunk2 dual bend short shifter
A decent sterio system
A better radar detectur :]
Engine:
Ls (good chance, donated by my brother's teg)
- Just gonna run N/A LS/VTEC with goodies
Spoon drop in Filter/keep stock airbox
Spoon headers
wire tuck
Suspensions/Tires:
Front/Rear strut bar
97+ Integra dc2/dc4 rear disc conversion
99 GSR Front Sway bar
Asr brace/ 22mm ITR rear sway bar
Beaks lower tie bar
SSR LCA
Ksport coilovers (12f/10r for track use)
Rota C8 16" for daily/ Current slips for track use
Thinking about front side frame reinformance brace also.
*i've done a lot of suspension research, and i think i'll leave it at this but who knows*
Ur car look sick!!!
just a friendly advice. I have CTR headlights and just gor 6000k hid - this 2 things dont stack!. CTR headlights dont have glare shield and cause of that u blind everyone in your way - impossible to drive.
Now I will swap my CTR headlights for some OEM ones and and paint them. Its up to you what you do with your own
once again, one of the best looking rides here
just a friendly advice. I have CTR headlights and just gor 6000k hid - this 2 things dont stack!. CTR headlights dont have glare shield and cause of that u blind everyone in your way - impossible to drive.
Now I will swap my CTR headlights for some OEM ones and and paint them. Its up to you what you do with your own
once again, one of the best looking rides here