Pics of my 00 hatch.

[SlowTEC]

Nice turbo, have the same on my B16... VERY satisfied

 

[Sundown]

very nice man.. I never knew you had a ek hatch OR that it was auto at one point..

 

[JiuJitsu_greg]

I'm liking the quality of the build. everything is so new and good looking. Not liking the interior though. Gotta stick with one theme bro. If you are gonna rob black parts with red stitch you should switch you seats floor mats and change the interior color to black too. good job though

 

[EK|B]

It will look bad ass with a drop. Did you experience a lot of lag with the turbo auto?

 

[Hellhatch]

I'm liking the quality of the build. everything is so new and good looking. Not liking the interior though. Gotta stick with one theme bro. If you are gonna rob black parts with red stitch you should switch you seats floor mats and change the interior color to black too. good job though

LOL ya that was a old pic of the interior from about 3 years ago I stripped off the silver and i'm in the process of changine it to black i took my door panels apart and im putting red tweed on the door arm rest. Getting some nrg seats that are all black with red stich should look nice when done.

 

[Ub3RdoRK]

i like the interior

 

[QzFiNeST107]

build looks great
i did a auto to manual conversion as well

 

[Nine78Guy]

very nice. off to a great start

 

[rey_boricua]

good job looks great

 

[Hellhatch]

f**k its been a month since i updated this thread well the pig is in i got it in sat/sun i got to tighten up some loose ends then after start up i get an alighment then inspection for the good old sucky obd2 jersey then the snail goes on and off the xenecron to get chris to tune it on Ectune.

The only casualty a brand new omni power tps Dam that blox IM is close to the fire wall.

Delsol driver seat installed gotta clean the passenger seat and swap over the brackets from my hatch. Pics suck.

 

[Genuine Rolla]

so far so good broski..! I like the progress.

 

[Suanico]

I got a new blox TPS i'll sell you for cheap

 

[AlexM]

I think it could go down a bit more. With a bit of a wire tuck that bay would be amazing, it cleaned up really nice.

 

[vid_man]

welcome an i must say car is comin together pretty good.. GL bro

where did you pick up that LSD from ?

 

[Hellhatch]

welcome an i must say car is comin together pretty good.. GL bro

where did you pick up that LSD from ?

http://www.erzperformance.com/product_p/lsd9200.htm
i got the version 3.0 but lately i've been seeing alot of weird obx's coming out with no names on them completly blank. You have to redo the spring washers inside and put them in the right order.

 

[Hellhatch]

Gotta new snail this week.
i just got a new snail its a new garrett T3/TO4E turbo these are the specs. Sorry for the delay with my build i just put in a pool and a 14X12 deck for my patio and im building a deck around my pool.
COMPRESSOR SPECS:T04E housing .60 A/R housing
Flow: 53 lbs/min, 678cfm
60 Trim wheel
Turbine specs:T3
.63 A/R housing
High Flow 76 trim Stage 3 wheel

Was having problems with my current setup fabbing up a downpipe so i decided to ditch the greddy tdo5-18g and get the t3/t4 with a 4 bolt exhaust flange makes it easy to do the dp i wanted. Greg from www.go-autoworks.com is gonna make a 2.5 flared to 3"dp to keep my ac i already have one of his log manifolds.

T3/t4 on the left and greddy on the right.

 

[EatingYourBrainsY0]

looking good, wonder if ive seen you some times.
im seldom in dover.

 

[Destroy]

looks good

 

[mosaic_hardflip]

Awsome

 

[mosaic_hardflip]

^^^^^^ Wow i cant spell......