Yup, there is always something....
Project: 240SX...Commence!
- Thread starter Road Pirate
- Start date
That video was music to my ears, ill be waiting for the time when the whole thing is finished.
Soon!!
Always haha
Thanks a lot man! Ordered new injectors, they should be here soon. Also ordered a fuel rail adaptor so I can get rid of the oem fuel damper, and a z32 fuel filter. Scored a set of OEM Nissan 180SX window visors as well. Should all be here this week.
But the lady is finally coming home from her 3 month training out in VA for her national guard, so we're gonna be taking a short vacation. I'll do as much as I can before then!
Got my fuel filter and fuel rail adapter in today, will make some more progress on it this evening and post some pics!
She go to ait?
^
Yeppers
Yeppers
Piktars!!!
Replaced my old fuel filter with a Z32 filter...much bigger. Plus, OEM Nissan quality to replace this chinese filter!
Forgot to take a picture, but I got rid of the OEM RB25DE fuel damper. Looks like a secondary FPR, and it's not needed. So I ordered a FPR adapter so I can run the feed to that, vs the damper. Which let me re-route the fuel feed to the correct side rather than all the way to the front of the engine where it originally was.
Installed the ABS unit again. I'll get rid of ABS someday, but till then it'll hog up the engine bay :/
As it sits. So close! Literally waiting on my 1 injector and it'll be good to go. Then I can finish making the bay a little more presentable, finish the gauges, brakes, etc.
Forgot to take a picture, but I got rid of the OEM RB25DE fuel damper. Looks like a secondary FPR, and it's not needed. So I ordered a FPR adapter so I can run the feed to that, vs the damper. Which let me re-route the fuel feed to the correct side rather than all the way to the front of the engine where it originally was.
Installed the ABS unit again. I'll get rid of ABS someday, but till then it'll hog up the engine bay :/
As it sits. So close! Literally waiting on my 1 injector and it'll be good to go. Then I can finish making the bay a little more presentable, finish the gauges, brakes, etc.
ImportFan1
Super Moderator
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Had the center insert been the same color I would have thought this was your car.
f**king amazing shot of a car. makes me ALMOST want one lolHad the center insert been the same color I would have thought this was your car.
Hows it comin in here Greyson?
Small updates but yes! And me too!Hey, you have updates!
Can't wait for driving videos when you get that injector
Haha, that was the one picture that inspired me to go full type x. I love it!Had the center insert been the same color I would have thought this was your car.
Went on a vacation with the lady to visit her family in Omaha, then drove down to Kansas City to go to a theme park and what not. Finally back, and here's my small updates:
Finally get my injectors, replace them:
Battery is dead...son of a. Recharging it now..
Also got some OEM Nissan 180SX window visors. Not sure how I feel about them just yet, but I'll wait to judge until the cars outside so I can get a full shot of them in the light.
Patiently waiting for startup vids...
ImportFan1
Super Moderator
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
This
I concur with those above ^
Hopefully this will hold you guys over for a bit - runs on all 6!!
(click das link)
http://www.flickr.com/photos/45395863@N02/9499503438/
(click das link)
http://www.flickr.com/photos/45395863@N02/9499503438/
Probably not a drift video, but I'll take one of it moving on its own power soon!
Startup video - it was a cold start, and this thing hates cold starts!
http://www.flickr.com/photos/45395863@N02/9503497230/
http://www.flickr.com/photos/45395863@N02/9503497230/