The Proj :JDM b16a t70 boosted

[greenlx777]

So here is where im at so far, beside lack of time and fitment issues since im making everything from scratch i really shouldnt complain.
it barely touches the p/s pully, but i might be able to position the turbo in a way that leaves about 1mm of space which is what i need to add homemade filter.

yeap 3" exhaust line straight pipe all stainless steel with the sexy sounding flowwwwwwmaster

Strealthmode's oil line kit for t4

custom made top mount big money saver

something i learn of the hard way, dont cheap out on ching chang parts get the good s**t, u'll thank yourself later

all charge piping custom fit

.

i went a little baller with the vbands, oh well

tapped the pan

downpipe finished, good thing i remembered to install a 02 bung plug

firewall oil line kit

Returnline

gotts love stainless

all done and ready for a good tune and boost, using some TT 660cc injectors on this and im running chipped ecu

 

[Genuine Rolla]

That is freaking sick.

How did I not know you were swapped....!?!?!?

 

[oddeb707]

4dr+swap+turbo=sexy

 

[greenlx777]

That is freaking sick.

How did I not know you were swapped....!?!?!?

i lol'd
you say that every time i post a pic

 

[toneekay]

niceeeee, goodluck on the build

 

[2slo4u]

NIICE!!! you'll love being boosted i wish i knew how to weld

 

[mike@synapse]

like the home made turbo setup. ballin on a budget. what are you using for engine management?

 

[d16_turbo]

nice................ why did you weld a v band flange on your turbo if it already had one on it ???

 

[stealthy]

ooooh an elephant mani.....


why such a big turbo on a b16 that is stock?

x2 on the double vband?

 

[greenlx777]

ooooh an elephant mani.....


why such a big turbo on a b16 that is stock?

x2 on the double vband?

this is why. the turbo flange was not the same size and neither was the gap for the clamp on the turbo, it would have never sealed up properly, i dont know if it was the clamp or the turbo but i was told the master power turbos have this issue

 

[d16_turbo]

oh ok, i knew there was probably a good reason for doing it ............ keep up the work

 

[lkailburn]

i'm very confused lol. you have a huge ass t70 on the second most ghetto HMT manifold design lol. why not get something that will actually help you spool that turbo?

i was just about to question the double vband but that makes sense. although, i would have just found one to match the turbo instead of welding something onto the turbo.

i run that same magnaflow and it sounds great. deff a good buy for the price.

goodluck with the rest of the build

-Luke

 

[greenlx777]

i'm very confused lol. you have a huge ass t70 on the second most ghetto HMT manifold design lol. why not get something that will actually help you spool that turbo?

i was just about to question the double vband but that makes sense. although, i would have just found one to match the turbo instead of welding something onto the turbo.

i run that same magnaflow and it sounds great. deff a good buy for the price.

goodluck with the rest of the build

-Luke

well unfortunatly there isnt any local stores that carry vband flanges and clamps on hand, you gotta order that and lord knows im not going to be paying out the ass for trial and error, b/c these things never fit perfectly, at least this way i can be sure to get a good seal which is most important and it doesn't look that bad anyways all polished up.
and that manifold shold spool up just fine around 45-50 if i made my calculations correct

 

[d16_turbo]

who cares what it looks like as long as it works.

 

[greenlx777]

bump and im done

 

[umair]

nice!! by the time you hit full boost it will be time for you to shift. you should have gotten a smaller turbo.

 

[d16_turbo]

nice!! by the time you hit full boost it will be time for you to shift. you should have gotten a smaller turbo.

that turbo is not that big

 

[greenlx777]

spools at 5g just like i imagined, i sneaked up to 2psi with no tune...hihihihihi i know i shouldn't but until i get to the shop i gotz to have me some fun

 

[Winki]

spools at 5g just like i imagined, i sneaked up to 2psi with no tune...hihihihihi i know i shouldn't but until i get to the shop i gotz to have me some fun

you better get to a shop and stop trying to have fun

 

[Jeegz]

sick build!