To Those With A Dohc Zc

[JDMefHATCH7]

what ECU are you running with your engine?
i know the PM7 is the original ZC
PM6 is original Si and will run a ZC without a problem
and a PG7 will run it as well


however will a PR4 run it? keep in mind its off DA integras LS/GS and these are all as we know 1.8 DOHC not 1.6 DOHC as the ZC is....

please only reply if you know about the subject thanks alot..

 

[bizoneoeh]

Yes, you can use a PR4.



I ran a obd0 PR4 with my zc and it ran awesome. I even kept using that same PR4 when I went turbo z6.

 

[JDMefHATCH7]

but then again youre alll the way in holland and EDM ZCs are somewhat different than JDM ones...
idk my DOHC ZC isnt running right and i fear its the wrong ECU...

 

[bizoneoeh]

but then again youre alll the way in holland and EDM ZCs are somewhat different than JDM ones...
idk my DOHC ZC isnt running right and i fear its the wrong ECU...

Holland, MI believe me, you can use it no problem.

 

[Steven.]

Yep pr4s work good. Just a little richer then a pm7 and pg6.
Best option if u can't find a pm7, is to chip a pr4 or pm6 and load pm7 maps that's what I used to do.

If Ur one of the ones who converts to obd1 or buys a obd1 dohc school, u use the rare p29 ecus. I had one a while back but sold it.

 

[JDMefHATCH7]

Yep pr4s work good. Just a little richer then a pm7 and pg6.
Best option if u can't find a pm7, is to chip a pr4 or pm6 and load pm7 maps that's what I used to do.

If Ur one of the ones who converts to obd1 or buys a obd1 dohc school, u use the rare p29 ecus. I had one a while back but sold it.

how are you suppossed to do that?

 

[JDMefHATCH7]

Holland, MI believe me, you can use it no problem.

alright man well im gona try and use another pr4 cause this one has different screws so maybe its been f**ked with... and ima try a PM6..

 

[Steven.]

get a stock ecu, and send it to someone to get someone to solder a zif socket in it, and burn a chip.

the DOHC ZC will run on a pm6, but remeber its made for a SOHC, so probably not as much fuel and different timing curves

 

[19ef90]

Holland, MI believe me, you can use it no problem.

your only in holland bro?
im about half an hour north of muskegon, MI. lol