Intercooling piping to fit

[--<EM1>--]

any know a certain company that makes intercooler piping to fit a 6th gen with fogs?

 

[Tek-C]

intercoolers will make you lose your fogs...

 

[--<EM1>--]

not all intercoolers tho. ive seen intercoolers with fogs. i just didn't want to cut off my bumper support so the fmic went directly under it. ive just been saving up to repaint and came to the conclusion i want my oem fb look with fogs back.

 

[NFR_AP2]

i had a ic, with my fogs....



what i did was....just put alot of spacers in between the FMIC and the bumper support to lower the ic, so it went under the fog brackets...

 

[2slo4u]

i had a ic, with my fogs....



what i did was....just put alot of spacers in between the FMIC and the bumper support to lower the ic, so it went under the fog brackets...

^^ smart guy

 

[NFR_AP2]

^^ smart guy

 

[Tek-C]

yeah, but I got a 96-98 and i had to lose my oem fogs

oh, and I have a JRC, so no go on the fogs...

 

[umair]

any know a certain company that makes intercooler piping to fit a 6th gen with fogs?

i thought you were selling your car.

 

[Shiznit]

you have to find an intercooler that has its end tanks on either the top or the bottom of the intercooler. ones where the end tanks are in the middle wont allow you to keep your fogs

 

[cadieux_j]

I'm going to keep an eye on this thread because I want the same thing, to keep my fogs with an IC, i have a 99 civic, and Im having a hard time finding a IC that will fit

 

[Drackonn]

you have to find an intercooler that has its end tanks on either the top or the bottom of the intercooler. ones where the end tanks are in the middle wont allow you to keep your fogs

what this guy said

find an intercooler that has the end tanks that are not in the middle, and you can mount it with the end tanks at the top and run custom piping or the other way around

 

[TiiM iiS l3eAsT]

yep ive seen ppl with intercoolers with the end tanks at the bottom so it takes the intercooler piping under the fogs.....

 

[--<EM1>--]

i have a jrc black fmic. the end tanks aren't directly in the middle. im gunna see what i can do tho.

and i was selling my car just bc i ran into a tight spot then realized i wanted to keep it.

 

[el_betiyo]

you have to find an intercooler that has its end tanks on either the top or the bottom of the intercooler. ones where the end tanks are in the middle wont allow you to keep your fogs

 

[civic92si]

mines have fog! mines an 92 Si hatch

one of them gotta be zip tied because i F up on the cutting

 

[--<EM1>--]

that gen fogs are alot smaller than the 6th gens. i guess the best way to go about this is put the fogs in and place the bumper on, then once the car is lifted look at the pipe routes and fmic placement to make sure. if im able to do it, ill defiinitly post a how to.

 

[hardcore97]

im going to try and figure out a way to keep mine even the its a 96-98 body style

 

[NFR_AP2]

it wasnt THAT hard...

 

[Tek-C]

i don't think I've ever seen a boosted 96-98 w/fogs. I could be wrong tho...it's just the placement for the fogs are right where the intercooler is...

 

[2slo4u]

im sure with the backdoor type of intercooler the 96-98 can keep the fogs and run the intercooler just fine