how hp can i get

[musezik]

I have buddy club cams, 3 inch exhaust, b16 internals,ram horn manifold,garrett a/r .60 ,440c injectors,hondata s300,tial wastegate.The person I bought the hatch from said it made 258 n 190 tq on 5 psi and it was tuned by King MotorSports. He gave me the dyno graph and everything else. I was wondering if I can make more horse power by cranking up the psi to 10 or could I go more. Also what kind of boost controller would be good?

 

[musezik]

anybody?

 

[fwdpower]

Uhh. I'd go 7-8 psi at the most. I suggest you to reinforce your internals otherwise. Like you mentioned, I'd purchase a manual boost controller, so you don't have to rely on your wastegate to regulate your boost.

 

[umair]

you may need to upgrade you injectors but i am not sure.

 

[oddeb707]

take it back to king motorsports and ask em

they can tell you all about your motor if in fact they did tune it

 

[musezik]

o ok

 

[musezik]

i got a question. When im driving and when i let go of the gas white smoke comes out. Is that bad?

 

[Silver Bullet]

r u tuned?

 

[musezik]

yep

 

[ryanM]

take it to nate at delusionH and he will be able to help you out.

 

[Max713]

I have buddy club cams, 3 inch exhaust, b16 internals,ram horn manifold,garrett a/r .60 ,440c injectors,hondata s300,tial wastegate.The person I bought the hatch from said it made 258 n 190 tq on 5 psi and it was tuned by King MotorSports. He gave me the dyno graph and everything else. I was wondering if I can make more horse power by cranking up the psi to 10 or could I go more. Also what kind of boost controller would be good?

those rods are only good to 220-250whp, sleeves good to 400whp. injectors def. need to be upgraded, you are probably pushing their limits already. you really need to invest in forged rods to go any higher safely.

and it is ALL in the tune, tune decides between a year of fun and a month of fun.

 

[hardcore97]

which BC cams do you have?

 

[musezik]

There cam gears. I got the yellow ones.

 

[Pootie]

i got a question. When im driving and when i let go of the gas white smoke comes out. Is that bad?

White smoke is water (antifreeze) usually with a bad headgasket.. But it should smoke all th time .


If it ONLY smokes when u let off, then it's a goood chance that it's valve-seals. they smoke on decell!(when u let off )

 

[Pootie]

There cam gears. I got the yellow ones.

thts just bling.

 

[musezik]

o ok. thax peoples

 

[musezik]

I got one more question. I think im going to rebuild over the winter and I was wondering what parts are the best parts for a ls so I can make over like 300hp or something like that. How much would it cost for everything?thanks

 

[TiiM iiS l3eAsT]

eagle rods.....stock head...but should clean it up....not sure on pistons....maybe wiseco, je srp, or arias....look up forged aluminum pistons.....then if i was you ....i would bore it a little so the cylinder walls are perfect....when i bought my std sized je srp pistons, i had to go thru 3 different ZC blocks to find the right one...

 

[Destroy]

Post up this graph that you speak of.

 

[got traction]

wait so you dont have bc cams...you just have bc cam gears?