wire tuck

[Steven.]

invest in a nice camera

 

[TiiM iiS l3eAsT]

lol tell me about it....got one you wanna give away ??!! lol

 

[Steven.]

a broken one lol $100

 

[TiiM iiS l3eAsT]

why would i buy a broken camera for 100 bucks lol.....

 

[Steven.]

i would. lol

 

[TiiM iiS l3eAsT]

why though lol??

anyways took more pics with the flash on lol still didnt turn out good though

 

[Steven.]

they look fine on my computer

 

[senatE]

wow you must not be running very much boost? no fuel pressure regulator or anything? just injectors?

 

[Tom]

wow you must not be running very much boost? no fuel pressure regulator or anything? just injectors?

looks like somthing on the firewall near the brake booster, but i could be wrong.

 

[kyle10182]

thats just a vacuum manifold.

 

[Steven.]

wow you must not be running very much boost? no fuel pressure regulator or anything? just injectors?

stock regulator can handle upto (and maybe more) then 400+ hp.

you would be surprised what stock components can handle.

and 450cc injectors dont need a regulator upgrade. just fuel maps modified in the ECU

 

[TiiM iiS l3eAsT]

stock regulator can handle upto (and maybe more) then 400+ hp.

you would be surprised what stock components can handle.

and 450cc injectors dont need a regulator upgrade. just fuel maps modified in the ECU

 

[senatE]

WOW damn 400 hp on stock. eh i guess im stuck on chevys thats prob why i was shocked. NEWAYS I GOT MY HATCH RUNNING!!!! it was my TPS but the part that sucks is i already sold the s**t to make it roll ahhaaha. so once i got it running i tore it down.

 

[TiiM iiS l3eAsT]

hey do you guys think the motor is built enough for 420whp???? i know i would need bigger injectors and a bigger turbo.....but could the stock head handle 420whp??

 

[senatE]

i ddoubt it, i heard 350 was playin safe. and 12ibs of boost should be max on stock motor but thats all word.

 

[TiiM iiS l3eAsT]

haha 12 psi on a stock motor ???....never base it off of psi....5psi on a small turbo is not going to produce as much air/horsepower as 5 psi on a big turbo would......plus my block isnt stock ....im running srp pistons and eagle rods....hks bead headgasket ....arp headstuds....and much more....i just need to get a good tune for it lol

 

[senatE]

god finally someone says something i was just sayin that psi just to say it. but yes i know what you were saying. i think you should be good

 

[TiiM iiS l3eAsT]

well i bought a new si throttle cable to hopefully solve the sticking problem....im also getting the valves adjusted later this week.....also the boost is stuck at 8psi for some reason.....when i tried turning it up on the mbc it wouldnt go anywhere its like stuck at 8 for some reason?????

took some new pics though
http://www.clubcivic.com/board/showthread.php?p=2449425#post2449425

 

[Steven.]

you cant adjust the valves? its take me like 30mins.

what psi spring do you have? and is the mbc hooked up correctly

 

[TiiM iiS l3eAsT]

its a internal wastegate.....the wastegate is set for 5psi when i had hooked it up at the beginning of the new engine.....i put on the mbc later on and turned the boost up to 10psi.....and then when i went to go turn it up to 12 nothing happened....it just stayed the same....so i turned it up a lil more and still nothing...the turbo will actually only do 8psi today.....soo i think my turbo might be f**ked up??

and yea its installed correctly i did a lot of research on how to hook it up lol