How much power?

krichman

New Member
5+ Year Member
What is a realistic number to expect if im putting a TD05 on a stock GSR motor?
 

projektej8

-------------------------
Registered VIP
5+ Year Member
826.8 whp
 


Esotericimage

Taking an H-T break
Registered VIP
5+ Year Member
Since you cant research yourself and this topic has been covered hundreds of times.. I will Spoon Feed you some info which will get you close to the answer you want.

click here

Put in your specs in the appropriate fields and get a very good estimate on what power your set up should make etc
If you go to the top and go to B series, D series etc you can figure out your compression ratio etc
and If you go to transmission calculator then you can compare transmissions and its real freaking cool
I tested this against my cars numbers and they were pretty dang close
 


Zzyzxek

New Member
5+ Year Member
if you had to ask that question i suggest you step away from the motor and dont try anything lol
 

TiiM iiS l3eAsT

Scamming Piece Of s**t
Registered VIP
Registered OG
5+ Year Member
stock b series can handle around 300whp...

so i would shoot for around 280whp...
 

krichman

New Member
5+ Year Member
well i was just looking for some safe numbers to shoot for i know my way around a motor and was just seeing what can be put out before i do the rebuild after a while thanks for those of you who gave helpful advice and to those who did't i think its reallly cool when ppl have no life and have to resort to making fun of ppl on a forum to make themselvs look good.
 

civic92si

Gina my Lady in red
Registered VIP
5+ Year Member
well i was just looking for some safe numbers to shoot for i know my way around a motor and was just seeing what can be put out before i do the rebuild after a while thanks for those of you who gave helpful advice and to those who did't i think its reallly cool when ppl have no life and have to resort to making fun of ppl on a forum to make themselvs look good.
honestly, its really on your setup. smaller turbo = less hp.

example:

TD05H w/GSR motor 10psi = 260whp
t3/t4 50ar w/GSR motor 10psi = 290-300whp
 

rwlsvtec_03

New Member
Registered VIP
5+ Year Member
If you are only running a td05 on a GSR, you will get bored with it in weeks.
 

Destroy

New Member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
well i was just looking for some safe numbers to shoot for i know my way around a motor and was just seeing what can be put out before i do the rebuild after a while thanks for those of you who gave helpful advice and to those who did't i think its reallly cool when ppl have no life and have to resort to making fun of ppl on a forum to make themselvs look good.
Kids like you make it so easy.
 


Top