looking good greyson..
thought u just put a/c back in the car and now ur ripping it out.. lol
thought u just put a/c back in the car and now ur ripping it out.. lol
'00 EBP EM1 - Newest project
- Thread starter Road Pirate
- Start date
I know right? lol. I might put it in my daily along with power steering so at least I'll be comfortable haha.
Well, I decided I'm going to get rid of my nasty stock fuel lines and filter for some black braided lines, fittings and inline filter.
I will walk you guys through this step by step, there's a writeup on HT about it, but its not very detailed. I'll do a step by step with pictures so if you guys want to do this somewhat cheap mod, it will be a little easier! I'm waiting on my fittings and such from ANplumbing, but at least I got my tools I need.
You will need a 37 Degree flare tool and a mini-pipe cutter. Here are the two, their just generic summit racing items. I have a picture of the part numbers also..very cheap!
I'll start on the actual writeup when i get the other parts in!
Well, I decided I'm going to get rid of my nasty stock fuel lines and filter for some black braided lines, fittings and inline filter.
I will walk you guys through this step by step, there's a writeup on HT about it, but its not very detailed. I'll do a step by step with pictures so if you guys want to do this somewhat cheap mod, it will be a little easier! I'm waiting on my fittings and such from ANplumbing, but at least I got my tools I need.
You will need a 37 Degree flare tool and a mini-pipe cutter. Here are the two, their just generic summit racing items. I have a picture of the part numbers also..very cheap!
I'll start on the actual writeup when i get the other parts in!
Thank you 
Well I did a few small things to the car today, took off the fuel filter/line that goes to the rail so I can be ready once my fittings come in.
Took off the stock clutch line cause I'm waiting for the full ChaseBays clutch kit
And I also re-routed the main vac from the booster to my intake manifold. I just turned the nipple downwards, cut and re-routed the line.
Getting there...slowly but surely
Well I did a few small things to the car today, took off the fuel filter/line that goes to the rail so I can be ready once my fittings come in.
Took off the stock clutch line cause I'm waiting for the full ChaseBays clutch kit
And I also re-routed the main vac from the booster to my intake manifold. I just turned the nipple downwards, cut and re-routed the line.
Getting there...slowly but surely
Thank ya.
Just ordered all my OEM plugs and grommets for the firewall. Werrrrd!
Just ordered all my OEM plugs and grommets for the firewall. Werrrrd!
dangggg...
^
I',m gettin to it
And thanks dudes!
I',m gettin to it
And thanks dudes!
Well pulled my carbon canister box since I'm OBDI, and I wont throw a CEL. I will be cutting the stock line and running the exit underneath my car so I wont smell any gas fumes.
Also, here's my wire harness. It's ready for loom, I just brought it to the warehouse to see how I'm going to run it. I'll post pics once I start looming it!
Also, here's my wire harness. It's ready for loom, I just brought it to the warehouse to see how I'm going to run it. I'll post pics once I start looming it!
Thanks a lot man! Yeah I'm actually going to be ordering a new tri y header very soon. Good power gains, not horrible ground clearance, and looks great.
Haha yeah mounts will definitely be a must once I get all this done. And for sure, I'll sell em to ya cheap!
Well got some of my looming in! I have two other sizes on their way.
0.125" for my 1 wire sensors. I got 25 feet, just because I'll use them for something else, and its SUPER cheap. This roll cost me 6.25$
.375" for my 2-4 wire sensors, roll of 25 feet also. This roll cost me 11.50$
And all the heat shrink I could ever want, various sizes. 9.72$
Everything together:
Once the other sizes come in I will get started!
0.125" for my 1 wire sensors. I got 25 feet, just because I'll use them for something else, and its SUPER cheap. This roll cost me 6.25$
.375" for my 2-4 wire sensors, roll of 25 feet also. This roll cost me 11.50$
And all the heat shrink I could ever want, various sizes. 9.72$
Everything together:
Once the other sizes come in I will get started!
where did u get ur loom and shrink tube?
i need to get some badly..
i need to get some badly..
cableorganizer.com, awesome stuff and pretty quick shipping
good stuff. thanks for the info
No problem
Got some more goodies in the mail today:
Got some more goodies in the mail today:
I installed all of them to the places where I want them to be as a test fit. I still need to order some more to complete everything. Let me know what you guys think!
They will look much better on a clean motor and freshly painted bay I promise. haha.
They will look much better on a clean motor and freshly painted bay I promise. haha.
what kind of intake is that?
looks veryy nice btw !
looks veryy nice btw !