My real RHD eg6 build

[12.8:1 Ls/vtec]

Well I have a few pics of me working on my car from over the past 2 days.
My new Brembo drilled and slotted rotors

I sand blasted and painted the centers of the rotors so they wouldn't rust.

Rear installed

Front "installed"(no axles)

My exhaust came in a few days ago just haven't posted pics. Apexi ws2

Installed the function7 subframe brace.

Getting ready for cutting out my foglight hole.

lip and duct test fitting

Test look on the car

Got most of the engine stuff done, gonna work for a few hours tomorrow.

 

[12.8:1 Ls/vtec]

Well worked on my car for a few hours today. I finished the wiring harness in the bay and installed my walbro 255. It took like 15 minutes from start to finish on the pump.

I actually moved the location of where I was initially going to put my harness to somewhere much easier to deal with. Didn't take long to do. Luckily the place I picked is easier to do. The grommet fits really tight like its supposed to.

Test fit from inside.(primed the bare edge)

Outside shot with harness ran through it.

Fuel pump installed.

 

[hardcore97]

nice work! always liked your builds

 

[CHILD]

super clean

 

[RoidBear]

The ride is looking great so far!

 

[act440]

lip and duct test fitting

Test look on the car

what lip is that? sorry if you already posted what kind it is

 

[pmac193]

^^^^ J's lip and duct.

 

[act440]

^^^^ J's lip and duct.

thanks

 

[12.8:1 Ls/vtec]

Well these are a couple of pics of me working on it this last weekend. I ran into a bit of a problem with the half shaft. It would appear I bought the wrong one a while back. It must have been an automatic one or a crv one. Long story short it's not the same. Good part is I bought a gsr swap and I just took the half shaft off it.
My hasport stage 1 axles

Also I got my password jdm bolts and battery tray in.

I also finished my wiring harness and started putting in the carpet back in. We also put a few fasteners and the fuse box in. Ready for the dash and more pics of other things on the way. Also I have to take a pricey trip to honda

 

[act440]

Also I have to take a pricey trip to honda

possibly purchasing a new si?!

 

[12.8:1 Ls/vtec]

Well my Bisimoto header came in today. Here are a few pics

A few pictures of it sitting up there.

hope to have some more progress soon.

 

[ej_swag]

That thing is beautiful

 

[ekcoope]

man nice freakin build man loving that header.

 

[sohclubkid]

drool! Bisi is awesome!

 

[TigBitties]

i cant even imagine how much that header was

 

[CH33V5]

Bisi products = major winning.

 

[12.8:1 Ls/vtec]

i cant even imagine how much that header was

It's not really that bad. It was only like $850 bucks before shipping.

 

[TigBitties]

It's not really that bad. It was only like $850 bucks before shipping.

oh lordy. thats a lot of money, but damn well worth it

 

[12.8:1 Ls/vtec]

real parts=real money. The ssr header I was looking at was 1125 before shipping. But the Bisi one looks way better.

 

[TigBitties]

real parts=real money. The ssr header I was looking at was 1125 before shipping. But the Bisi one looks way better.

very true, atleast your not cheaping out on this build. i wish more people were like you.