Work for the first time this week 
What are you doing / did you do today / CHAT THREAD
- Thread starter JohnS.
- Start date
Very much so. Bit of a headache now but otherwise I'm doing well.
Sent from my ADR6400L using Tapatalk
Looks like you need itCleaned my bay up then went and took my entry test for the collage and now im about to hit up a strip club with my friend
Finally ate something today. First food since Tuesday morning. I'm soo happy right now.
wait...so you havent eaten anything in 4 days?
Damn dude you need to start eating so you can grow up to be big and strong :p lol I keed
Sent from my PC36100 using Tapatalk
So your getting married?
Id say congrats...but your life is over mang.
What'd u eat? Took me a week to eat and ill never forget the meal mom made. Stuffed chops w fried taters and green beans. Oh mang it was heaven after a week of shakes, jello, and pudding.
Sent from my ADR6400L using Tapatalk
Put in a new clutch and flywheel today. Turned out to be a bigger job than expected....
First we pull the tranny off and everything is SOAKED in oil. So my friend says I should get a new rear main seal. I say ok. Then he mentions we have to pull the oil pan gasket. I say awesome, because I have a new gasket I've been wanting to put in anyways so nows the perfect opportunity. So we run to my house to get the oil pan gasket, run to Honda to get the rear main seal (which was $25!
), then remember we need oil if we're dropping the oil pan so run to advanced auto to get a 5qt jug of oil. We replace everything and she fires up and drives away with no hiccups . It's making a weird chatter noise which my friend is going to check out tomorrow.
But all in all, the whole thing went VERY smooth. All the bolts came out without a problem. We even dropped the header to get to the lower tranny bolts and oil pan and those came out without a problem. We didn't break any bolts, except we stripped a couple of threads on one because the bolt wasn't long enough and we were just cranking on it with an impact. A longer bolt fixed that.
The car drives SSSOOO smooth now. The clutch pedal literally feels like water. The lightened flywheel definitely is noticeable. And I'm not used to a clutch that actually grabbed. I accidentally let the clutch out too quickly a few times and the car just lurches. Definitely have to get used to the lightened flywheel over stock.
First we pull the tranny off and everything is SOAKED in oil. So my friend says I should get a new rear main seal. I say ok. Then he mentions we have to pull the oil pan gasket. I say awesome, because I have a new gasket I've been wanting to put in anyways so nows the perfect opportunity. So we run to my house to get the oil pan gasket, run to Honda to get the rear main seal (which was $25!
), then remember we need oil if we're dropping the oil pan so run to advanced auto to get a 5qt jug of oil. We replace everything and she fires up and drives away with no hiccups . It's making a weird chatter noise which my friend is going to check out tomorrow.But all in all, the whole thing went VERY smooth. All the bolts came out without a problem. We even dropped the header to get to the lower tranny bolts and oil pan and those came out without a problem. We didn't break any bolts, except we stripped a couple of threads on one because the bolt wasn't long enough and we were just cranking on it with an impact. A longer bolt fixed that
.The car drives SSSOOO smooth now. The clutch pedal literally feels like water. The lightened flywheel definitely is noticeable. And I'm not used to a clutch that actually grabbed. I accidentally let the clutch out too quickly a few times and the car just lurches. Definitely have to get used to the lightened flywheel over stock.
I had ramen noodles. OMG the chicken was orgasmic flavoring..
Nope, been runnning on apple juice and lots of water. Got my wisdom teeth out, therefor you become a derp at eatting.
Im going to go get my tattoo them im going to sit around all day and go on CC
Details?
Just worked all day excited for tomorrow my new seats are going in
Sent from my PC36100 using Tapatalk
Sent from my PC36100 using Tapatalk
XpL0d3r
I had a Civic once.
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Hey you. Accept my re-friend request
... Just got back from NC. Hot as fck there. Had a great time though. Went out to the bars on the last night and had to catch a plane at 6 to come back to NY... was up for 27 hours straight.
Whole entire trip.. from Wed. night to Sunday morning... I spent.... $15. Free plane, food, drinks, etc. All I bought was.... a t-shirt
ImportFan1
Super Moderator
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Went to the Brickyard 400 and got burnt.
the chatter noise could be a input shaft bearing.Put in a new clutch and flywheel today. Turned out to be a bigger job than expected....
First we pull the tranny off and everything is SOAKED in oil. So my friend says I should get a new rear main seal. I say ok. Then he mentions we have to pull the oil pan gasket. I say awesome, because I have a new gasket I've been wanting to put in anyways so nows the perfect opportunity. So we run to my house to get the oil pan gasket, run to Honda to get the rear main seal (which was $25!
But all in all, the whole thing went VERY smooth. All the bolts came out without a problem. We even dropped the header to get to the lower tranny bolts and oil pan and those came out without a problem. We didn't break any bolts, except we stripped a couple of threads on one because the bolt wasn't long enough and we were just cranking on it with an impact. A longer bolt fixed that
The car drives SSSOOO smooth now. The clutch pedal literally feels like water. The lightened flywheel definitely is noticeable. And I'm not used to a clutch that actually grabbed. I accidentally let the clutch out too quickly a few times and the car just lurches. Definitely have to get used to the lightened flywheel over stock.
on my honeymoon, long ass drive, now time for some pizza and relaxing.