A girl get emotional? Never....
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My EJ8; my slow build.
- Thread starter crash!
- Start date
cough Teaser cough 
She is in washington which is pretty much Canada, so who knows whats going on...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Huh?
"today" was forever ago. what's the status of this thing?
It won't start. The distributor is wigging out and is trying to be on while starting. The motor is getting fuel and holding compression though, which makes me feel so much better. At least I know that the dizzy freaking out is mostly a fault of my wiring job versus something I wouldn't expect. Also the Crank Postition Sensor is messed up, I'm getting a new map burned and I'm investigating now.
And I realized the engine speed output wire was supposed to be wired how I thought originally, so I just have to fix that. I'll upload pictures soon.
Work party.
Flywheel on
Clutch
... and my reward for when it starts. Thanks to Tim.
Tranny on
Seems legit.
So I cut the plug off my D series and started wiring it onto this distributor
Time to macguyver this beezy in. With two people and a jack
Sooooo sketch.
How it's sitting currently, except the downpipe is on now.
Going back to the grind after work tonight. Might've solved the starting issue!
Flywheel on
Clutch
... and my reward for when it starts. Thanks to Tim.
Tranny on
Seems legit.
So I cut the plug off my D series and started wiring it onto this distributor
Time to macguyver this beezy in. With two people and a jack
Sooooo sketch.
How it's sitting currently, except the downpipe is on now.
Going back to the grind after work tonight. Might've solved the starting issue!
Looks good besides ur tape job...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
this is kinda opposite the mentality on everything else you've done.it holds. Doesn't need to look pretty.
you should solder those connections and at least use some shrink wrap around it. electrical tape just doesn't cut it
Off in ten.
Started up last night. needs a valve adjustment and one of the torque mounts, and I had to run it on an Eric's map. Also the exhaust doesn't quite line up (one of three bolts) and for some odd reason the front end doesn't line up 
But I drove it home last night and drove it to work this morning. Even with a test pipe and exhaustleak its SOOOO much quieter. I've only put 40 miles on it, but man it feels good! I feel likea newb with the new clutch too
Will post pictures and I've been asked to do a video feature when the swap was done. You guys will definitely be seeing it soon!!
HE LIVEEEEEEEEES.