pull the rears and straighten out that rear camber asap!
I HATE all that gay camber people rock these days.
I HATE all that gay camber people rock these days.
New member from the NW
- Thread starter 90wagon
- Start date
90wagon
New Member
Yeah I really want to pull the rears a little more but imma custom fab that plus add a little lip. As far as straightening the rear "you need to understand the goal of my build which is stance as a daily". I am fully aware bout what might happen with my goal i already know so u don't have tell me. I am at peace with the possible problems and excessive currency I may have to fork over. Here's the problem >> people who hate stance/excessive camber don't ask the vehicle owner what's he's or her goal or the purpose of one's build, this is key to understanding. The goal of my build is stance daily and on the week ends change up my wheels and height/alignment for tracking or qtr mile runs for the people who talk s*** and wants to step up to the line plus i want to see what my wagon can do in the very near future. Forgot to mention my wagon isn't my only vehicle it's just my work car, a to b car, do what ever i want car you catch my drift. I am not there yet with my wagon but once i drop in my built engine and turbo pieces we'll see.... I'm saving up for another set of wheels/fortune auto coil overs with custom valving/spring rates >> high or mid high offset wheels with proper alignment/height for tracking or straight line qtr mile runs on the weekends or consecutive weeks.
Ask me first and understand my build instead of flaming me son that's the problem with people who hate or as one would say 'that's my opinion" just so they can get a pass to say what ever they want instead of being respectful. Peace be with you and thanks for the constructive criticism!... Ohhh yeah when I purchase my high offset wheels and change up the height/alignment I'll PM you to see what u think. I like hearing others thoughts some times they make me see angles I don't see as well as expose the hate within them instead of praising one's build just cause they doing things and being productive in life.
@civhacth92 What coilovers do you personally suggest or have experience with that out performs ksports kcontrols valving wise? When i mean experience i really mean experience not what people/friends said or that's what the forums said i really want to know what you have experience with. I love my ksports but even with swapping out the original 9.8kg from front to rear and ordering up new 12kg springs for the front and dialing in the valving to max the suspension feel isn't quite there yet it's hard for me to explain. You just have to drive my wagon i guess to really get what i'm trying to get across but i'm always in for suspension brand suggestions if you personally have experience with others. Corner loading is fine but i want less body roll. I may have to start swapping out my supporting suspension mods with other brands to see how they perform to each other. I heard good things bout fortune auto coils from a friend who's a NW representative in the drifting world plus he's a D1 driver and has them equipt on his 240 coupe. I never rode in is coupe yet it sucks that we have totally opposite work schedules plus his car is always in the shop.
Last edited:
90wagon
New Member
One more thing I got the hook up on alignment so its not a big deal for me .
90wagon
New Member
I'm commin with wood grain in a month or two, actual real wood i must say! Thanks for appreciating my post bro imma check out your swapped hatch build.
90wagon
New Member
Been having erratic idle for the past couple days tried cleaning the IACV with carb cleaner the problem went away then came back did this couple more times and same results. Decided to pick up a new IACV but new part wont be at parts store till Saturday morning, also snapped the gasket/o-ring.
OBD0 IACV
In the meantime gonna switch up my front lip to a VW VR6 lip.
OBD0 IACV
In the meantime gonna switch up my front lip to a VW VR6 lip.
90wagon
New Member
Haven't updated in a while so here you go....
VW VR6 lip install complete
Passenger seat storage tray install
After installing my passenger seat storage tray I also installed my new OBD0 IACV.
Import Faceoff Woodburn Oregon
Best Stance LOL...my homie took a picture of me without me knowing
Found this on facebook
Kent Washington Import Faceoff (shouldn't have turned the wheel would've looked better i think)
I keep'em clean...
Found on Facebook
This just in new mud flaps from New Zealand. The 4wd letters were already painted from the factory. I think these are EDM Honda Shuttle mud flaps but i don't really know...
Painted the Honda letters
Installed my bamboo slats...
VW VR6 lip install complete
Passenger seat storage tray install
After installing my passenger seat storage tray I also installed my new OBD0 IACV.
Import Faceoff Woodburn Oregon
Best Stance LOL...my homie took a picture of me without me knowing
Found this on facebook
Kent Washington Import Faceoff (shouldn't have turned the wheel would've looked better i think)
I keep'em clean...
Found on Facebook
This just in new mud flaps from New Zealand. The 4wd letters were already painted from the factory. I think these are EDM Honda Shuttle mud flaps but i don't really know...
Painted the Honda letters
Installed my bamboo slats...
This thing is so sexy. Props.
