06 Civic Fog Light Install Guide (pics!)

tkellymn

New Member
5+ Year Member
I am planning on buying these fog lights. The VSA switch is right where you put the fog light switch in the '07's
Just wondering if there is any suggestions out there of where to put the switch?
 


GETxERxDONE

New Member
Registered VIP
5+ Year Member
not sure how it would work, but the fogs for the 07 si's replace the stalk on the column, id keep it like that. but if not u can put it in change holder do the left of the steering wheel under the switches, thats where id put it
 

Civicboy98

New Member
5+ Year Member
10+ Year Member
anybody know if the supposed jdm yellow foglamps are any diff in install or are they the same thing just w/ a yellow tint to them? Its been a long time since i posted last and since lost my 98 dx that is my avatar to a tractor trailer and 3 other cars on the highway, long story but anyway looking at getting the new si and wanted some feedback also.
 


zenthos

New Member
5+ Year Member
Anybody know where I could get a copy of the Template? The kit I bought doesn't include it, and thanks for the pics SonicK20Z
 

GETxERxDONE

New Member
Registered VIP
5+ Year Member
zenthos said:
Anybody know where I could get a copy of the Template? The kit I bought doesn't include it, and thanks for the pics SonicK20Z
you talking about the template to drill the holes in the bumper?

i personally think the holes are pointless..i think they are to adjust the lights but eh i havnt needed it.

you can try collegehillshonda.com though or go to your local honda dealer and ask them for it. just tell them you didnt see it in your kit.
 

zenthos

New Member
5+ Year Member
Cool Get Er Done, I'll give it a shot this week, let ya'll know how it turns out :D
 

tekken2k

New Member
5+ Year Member
xenin, you're not supposed to have fog lights on with the high beams. its against the law unless its not illegall on your state. you might be able to work out something if you want but you gonna need some modifications.
 

tekken2k

New Member
5+ Year Member
i bought a JDM fog lights and install it. it works fine...plus i can turn the fog lights and high beam at the same time....
 

tekken2k

New Member
5+ Year Member
yes you could...just install one pin on the connector istead of 3...(only the hot wire)
 

GETxERxDONE

New Member
Registered VIP
5+ Year Member
the 07 and 08's have a different foglight kit, that replaces the headlight arm and adds a fog switch there
 

08_si_civic

New Member
5+ Year Member
now where does the switch go if you have VSA?????? cuz i bought the kit and idk where it goes?????
 

GETxERxDONE

New Member
Registered VIP
5+ Year Member
if you have a coupe with VSA you have to get the OEM07+ switch, it replaces the stalk that your turn signal/headlights are on. and adds a switch for foglights
 


Top