DarkCreep's Turbo Kit Install: The NO FAITH/Craftsman/slight knowledge build! *PIX*

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
Does it matter which port I use on the wastegate? Since it has one up top and one in the bottom.
 

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
Did you guys cut your hood for the wastegate??? I forced mine on accidently, put a slight dent on the hood.
 

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
Im pretty much done. Its getting towed tomorrow or tuesday to a local shop for a custom DP with DT welded on. Can you guys verify that the waste gate and BOV lines are installed correctly? Im using the top port on WG for boost controller, and bottom port is plugged up.


Are the waste gate lines and BOV line connected correctly??








 


Last edited:

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
All thats left to do is:
-Custom DP with DT
-Loom up injector wiring
-Mount IC to impact beam
-Install a push fan
-Custom pipe+filter for turbo
 

UCCRacing

No Fun
Registered VIP
5+ Year Member
Did you guys cut your hood for the wastegate??? I forced mine on accidently, put a slight dent on the hood.
That isn't good.. Your gonna have to make clearance... Maybe try the washer trick at the back of the hood?? But with movement of the engine especially with more power your gonna f**k something up...
 

civhatch92

That's my honda.
Registered VIP
Registered OG
5+ Year Member
That isn't good.. Your gonna have to make clearance... Maybe try the washer trick at the back of the hood?? But with movement of the engine especially with more power your gonna f**k something up...
That only affects the back of the hood.. the wastegate is hitting up in the front.. I had this problem with mine.. just said screw it and beat my hood until it cleared.. didn't really care as my hood was already beat up.. oh well.
 

UCCRacing

No Fun
Registered VIP
5+ Year Member
That only affects the back of the hood.. the wastegate is hitting up in the front.. I had this problem with mine.. just said screw it and beat my hood until it cleared.. didn't really care as my hood was already beat up.. oh well.
True, I was thinking more for just that little bit of an angel to take it off the WG.... Question is, is it hitting the framing portion or the actual outer skin?
 

Autoworks

New Member
5+ Year Member
You don't want that steel braided feed line running between the manifold, under the plug wires and over the distributor...that's an accident waiting to happen.

The paper gaskets your using on the WG are noo good, if you have one between the WG and manifold, remove it.

Did you tap the oil pan anywhere?

Hood clearance: Either use a shorter wastegate, only use the side port, or use a wastegate elbow adaptor.

(I'd also suggest using the stock metal exhaust manifold gasket instead of that perforated gasket. I'd reuse the old one providing it's in fair shape before using one of those.)
 

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
1 You don't want that steel braided feed line running between the manifold, under the plug wires and over the distributor...that's an accident waiting to happen.

2 The paper gaskets your using on the WG are noo good, if you have one between the WG and manifold, remove it.

3 Did you tap the oil pan anywhere?

4 Hood clearance: Either use a shorter wastegate, only use the side port, or use a wastegate elbow adaptor.

5 (I'd also suggest using the stock metal exhaust manifold gasket instead of that perforated gasket. I'd reuse the old one providing it's in fair shape before using one of those.)
1. So I just have it running through the top of the VC? Or how do you suggest I run it?
2. So just run it gasket-less? Thats all it came with is paper.
3. Not yet, thats what its going to the shop tomorrow for. I got the bit and everything to do it, but Id rather get it welded to guarantee no leaks.
4. I could use the side port? I thought that was for something else.
5. Will do thanks man. Ive been using the perforated one for my header and it never blew.
 

2slo4u

wait4me
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
1. So I just have it running through the top of the VC? Or how do you suggest I run it?
2. So just run it gasket-less? Thats all it came with is paper.
3. Not yet, thats what its going to the shop tomorrow for. I got the bit and everything to do it, but Id rather get it welded to guarantee no leaks.
4. I could use the side port? I thought that was for something else.
5. Will do thanks man. Ive been using the perforated one for my header and it never blew.
i suggest you run it under the manifold and then to the right
can't use the side port, but an elbow adapter is your best bet unless you want to close your hood very slowly everytime even though it'll hit
 

got traction

i rock the sohc
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
i personally wouldnt run a T between the intake manifold the the fuel pressure regulator. I would run the line for the bov somewhere else
 

Esotericimage

Taking an H-T break
Registered VIP
5+ Year Member
i personally wouldnt run a T between the intake manifold the the fuel pressure regulator. I would run the line for the bov somewhere else
:word:

you really should get a vacuum block.. theyre cheap and that way you have a good source for everything.. theres a nasty kink in your 'tee'
 

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
i personally wouldnt run a T between the intake manifold the the fuel pressure regulator. I would run the line for the bov somewhere else
What do you recommend I connect to?? I couldnt find a vacuum source that was the same size.
:word:

you really should get a vacuum block.. theyre cheap and that way you have a good source for everything.. theres a nasty kink in your 'tee'
The kink isnt there anymore, I adjusted so its pretty decent now.



______________________
Okay its pretty much done. Its at the shop right now for a custom DP and getting the pan tapped. Oh and a boost pressure gauge :P




 

somejaykid

i'm a mod now
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
the car looks good man
 


Top