This is "MY BUILD" INSPIRATION

[mymmeryloss]

f**k that...order Russell Stainless steel brake lines from the Club civic store. $99 make sure you get them for an EM1. Then buy standard rotor blanks from your parts store for an EM1 (roughly $15-18 a rotor) and then get some badass pads of your choice. (hawk) saves WAY more money

 

[203CT]

Well you were right Alex. I piece a kit together for around $150.

 

[mymmeryloss]

Well you were right Alex. I piece a kit together for around $150.

Even more

 

[203CT]

Picked up some front spindles off an em1. I'll be ordering new brakes, rotors, pads and Russell stainless steal brakes lines tomorrow.

 

[96romaCX]

I'm going to be doing this soon, if I can ever get the guy to pull the brakes. Front and rear integra discs, good job on the pick up man!

 

[203CT]

Yea I didn't plan on it but the guy I got them off of happen to have the fronts still as well. He swapped them out for 36mm JDM ITR suspension on his k-series em1 so I picked these up. The fronts are in good condition so that's a plus. I ended up braking the bleed screw on one of the rear calipers and stripping one of the caliper bolts so I have to find away to remove them so I can install new ones.

 

[Hecz]

what;s up with that brand new ebrake cable.

 

[203CT]

what;s up with that brand new ebrake cable.

I just got that in the mail. That spindle didn't have one.

 

[96romaCX]

Damn, I hope the brakes he pulls for me haven't been rotting in the bottom of his parts yard.

 

[203CT]

Yea mines have some wear on them those the reason I'm buying all these misc. Screw and what not from the dealer.

 

[jameswanser]

DAMN. did the dude store his parts at the bottom of a pond?

 

[203CT]

There not as bad as the picture make them look. A lot of it is just oxidation on the surface.

 

[CHILD]

Should have just gotten a spotless front and rear brake conversion from Hmotors and be on to the next thing.

 

[203CT]

Going to disassemble them tonight since my new parts should be here in a few days.

 

[203CT]

Russell Stainless Steal Brake Lines.

Centric/Stoptech Blank rotors

My pads should be here by the end of the week.

 

[mymmeryloss]

Hell ya!

 

[203CT]

Hell ya!

lol you should be a mod.

 

[mymmeryloss]

lol you should be a mod.

Lol y is that?

 

[203CT]

Lol y is that?

Your up here religiously bro and you always give good input. Plus aren't you a OG?

 

[mymmeryloss]

Your up here religiously bro and you always give good input. Plus aren't you a OG?

Sure. I just dont have a life. I am always on tapatalk. Idk if u can be a mod on tapatalk