i <3 this setup.
93 Sol Si d16z6 turbo build w/ Lots of Pics
- Thread starter JDM B20 EG6
- Start date
Ive got the time to do it and do it right. It is going to be a DD so I want it dependable. My goal is 350whp but I dont think Its goin to happen with this turbo. I originally thought it it was a .63ar exhaust, but once I received the turbo it is only a .48ar exhaust. So I should be good for around 300whp. I am supposed to be receiving the 720cc inj soon too. So later on the only thing I will need to upgrade my turbo to get the extra 350whp if I still want it after its done and ready.
Put a deposit down on a Spoolin Performance ram horn today. IC and Drain line where shipped today.
Well the guy sold the mani out from under me. Issued a refund. Still kinda pissed me off. Didnt even say anything about it til after is was done.
Man you should respray your engine bay!
I plan on it. I am degreasing it and gettin it ready so I can sand blast it. Then I plan to re-primer and paint the entire engine bay while the motor it out.
Thank everyone.
Looks like this is the mani I am goin to end up goin with its just goin to be like 2 weeks before I can do it.
http://www.rcautoworks.com/eg/product_info.php?cPath=77&products_id=257
I could build t he thing from scratch myself just dont know how I feel about custom building a collector. I may give it a try anyways as I do have a 20ft stick of tube just layin here. I know I can do the flanges without a prob and can get the elbows locally for 8ea.
Still waiting on my new drain line to get here as well as my front mount.
The front mount is the Precision Turbo 350hp fmic.
If the guy still has it when I get the money in a week or so then I am goin to get a decent ic pipe set.
I will also be cutting my own 5 bolt exhaust flange. I have a plasma here at the house to cut all my flanges with.
I also have a small sand/media blaster here. Just have to get new dry sand as mine got wet.
Looks like this is the mani I am goin to end up goin with its just goin to be like 2 weeks before I can do it.
http://www.rcautoworks.com/eg/product_info.php?cPath=77&products_id=257
I could build t he thing from scratch myself just dont know how I feel about custom building a collector. I may give it a try anyways as I do have a 20ft stick of tube just layin here. I know I can do the flanges without a prob and can get the elbows locally for 8ea.
Still waiting on my new drain line to get here as well as my front mount.
The front mount is the Precision Turbo 350hp fmic.
If the guy still has it when I get the money in a week or so then I am goin to get a decent ic pipe set.
I will also be cutting my own 5 bolt exhaust flange. I have a plasma here at the house to cut all my flanges with.
I also have a small sand/media blaster here. Just have to get new dry sand as mine got wet.
Does anyone know if a set of 88-91 crx springs will work on my car. I read somewhere that they are to short in the front. I have a set of sleeves from a sleeve coil over sittin here that I can use to raise the front up. They are a 1.9f and a 1.8r drop for the crx. Will they sit they same and the same or sim spring rates? Found a good deal on a set of barely used H&R springs is why I am askin.
FMIC and oil drain came in yesterday while I was in the hospital.
Wont be doing anything to the car for the next few days. My and my wife got hit head on tuesday and I and I have been in the hosp with a cracked C6 vert since. They ran more tests lastnight and cant find anything wrong with it now. They cant figure out why I am in so much pain the have done CT scans and MRI's and x-ray's. It showed up in the first sets but not in the latest ones.
I am feelin alot better today but still sore in my neck and back. They also told me my nose is broke, bruised ribs and pulled muscles in my upper and lower back.
My wife has pulled muscles in her back and has whiplash.
Wont be doing anything to the car for the next few days. My and my wife got hit head on tuesday and I and I have been in the hosp with a cracked C6 vert since. They ran more tests lastnight and cant find anything wrong with it now. They cant figure out why I am in so much pain the have done CT scans and MRI's and x-ray's. It showed up in the first sets but not in the latest ones.
I am feelin alot better today but still sore in my neck and back. They also told me my nose is broke, bruised ribs and pulled muscles in my upper and lower back.
My wife has pulled muscles in her back and has whiplash.
Thanks man. I will. The car will have to go to a shop to be looked at.
Sorry to hear about the accident!
Thanks for the thoughts everyone. No it was his fault for failure to yield right of way.
Glad to hear it was the other persons fault shops love insurance work and always do them right.
Im pretty sure he ordered the 510 injectors not sure any car comes stock with them but idk.
Boosted dsm's come with blue top 450's so im sure he just odered them and didnt pull them off another car.
Im pretty sure he ordered the 510 injectors not sure any car comes stock with them but idk.
Boosted dsm's come with blue top 450's so im sure he just odered them and didnt pull them off another car.
As for the work I am goin to do it myself. I did frame and body for 2 yrs in a very reputable shop back in TN.
The 510cc injectors are DSM EVO 3 injectors. They are for sale if anyone wants them. I am upgrading to 720cc so wont need these. They have been sonic cleaned and ran bout 2000 miles afterwards with only 93 octane.
The 510cc injectors are DSM EVO 3 injectors. They are for sale if anyone wants them. I am upgrading to 720cc so wont need these. They have been sonic cleaned and ran bout 2000 miles afterwards with only 93 octane.